TREX® LIGHTING–METAL/ALUMINUM/ENHANCE STEEL POST/ CONTINUED UNDER-RAIL LIGHT TO POST INSTALLATION
13. U se instructions for designated railing to complete lighting installation.
11
11. D rill a 1/2" hole under the location of underside of the lower bracket being used. Do this at all locations where under-rail lighting is being installed. In some cases the skirt might interfere with this hole location, so slight trimming of the skirt may be required.
12
12. T hread under-rail wiring through drilled hole on metal post, and through pre-drill hole in decking and blocking. TIP: If wiring is difficult to thread through hole in bottom of post, this opening can be drilled out and opened slightly to accommodate all wiring. Install posts as outlined in detailed railing installation instructions, keeping under-rail light positioned so this does not get damaged.
TIP: Using painters tape or equivalent, tape under-rail light to side of metal post.
23
LIGHT-OVERVIEW-1026
Made with FlippingBook Annual report maker