Trex® Lighting Installation Overview

TREX® LIGHTING–WIRING OVERVIEW/ CONTINUED

Tools Needed

Adjacent to Rim Joist

1" (25 mm)

1/2" (13 mm)

7/16" (11 mm)

Planning » When designing deck, plan locations of lights, power supply, and timer. These should be accessible for service when required. » Times must be installed vertically with receptacle To Splitter

4 x 4 Pressure Treated Post Location

GFCI Outlet

facing downward. Timer must be at least 1” from ground level when installed as per federal safety code regulations. Timer must be in view of the sun to use dusk/dawn feature. » First splitter must be installed within 20’ of transformer.

Dimmer (Optional)

Notched Blocking

Timer

Parallel to Joist

Transformer

Blocking Preparation » Refer to following images and cut out locations where required to allow for wiring placement. » Install pressure-treated posts per local code requirements, images below are general representations of blocking requirements.

Corner Post

Notched Blocking

4 x 4 Pressure Treated Post Location

Notched Blocking

4 x 4 Pressure Treated Post Location

5

LIGHT-OVERVIEW-1026

Made with FlippingBook Annual report maker