Trex® Lighting Installation Overview

TREX® LIGHTING–MAKING CONNECTIONS

3

Linear Lights Installation » .Install riser lights after stairs and risers have been installed. » Ensure stair riser has overhang of 3/4" to allow for proper installation of linear riser light.

1

3. Install riser light clips to riser at evenly spaced locations where light is being placed. Use 3 clips for a 32" riser light and 4 clips for a 42" riser light. Install clips with “tabs side up” pressing against the underside of the stair tread. Install with screws provided.

1. D etermine location for linear riser light directly under the stair tread, mark location where hole needs to be drilled for wire.

4

2

2. U sing a 1/2" drill bit, drill through riser (and if required any framing).

4. T hread wire from stair riser light into drilled out hole. Push and snap stair riser light into clips. Connect wiring accordingly,

8

LIGHT-OVERVIEW-1026

Made with FlippingBook Annual report maker