TREX SELECT ™ ALUMINUM RAILING PANEL Stair Installation Instructions
Marking and Cutting Stair Panel Rails (when required)
Installing Foot Block Insert
7
5
7. Turn panel upside down.
5. M ark top and bottom rails where they align with the rear wall of the top and bottom brackets.
8
KEY Mark Cut
KEY
6
2
8. Install foot block insert on underside of bottom rail at marked location using one #10 x 3/4" screw.
1/16"
Attaching Stair Panel to Stair Swivel Brackets
9
6. R emove panel and place on flat surface (note stair panel can be "unracked" if necessary for ease of cutting - use caution as balusters may come lose). Extend marks to side of rails. Brackets are designed to allow for railing to be installed with a standard perpendicular cut. Cut end of rails 1/16" shorter than mark on each side to allow for a better fit.
9. A ttach stair panel to swivel brackets using two #10 x 3/4" self-drilling screws (provided) .
2
Have Questions? 1–800–BUY–TREX
NOTE: Construction methods are always improving. Please ensure you have the most up-to-date installation instructions by visiting: trex.com
SEALST-0824
Made with FlippingBook Digital Proposal Creator