Trex Select® Aluminum Railing Installation Instructions

8

11

11. Gently tap bottom plug into cut side foot block (this will cover exposed cut aluminum).

2

12 12

12. Install foot block shaft to foot block insert with one #10 x 3/4" screw. Attachment of Bracket Covers, Skirts, and Caps

8. Install foot block insert on underside of bottom rail at marked location using one #10 x 3/4" screw.

Attaching Stair Panel to Stair Swivel Brackets

9

13

1

14

9. A ttach stair panel to swivel brackets using two #10 x 3/4" self-drilling screws (provided) .

Installing Foot Block Shaft

KEY Mark Cut

KEY

10

13. G ently spread and then snap corresponding bracket covers over opening in upper and bottom rails.

14. Attach provided post skirt to bottom of post.

15

15. A ttach post caps to posts (use of a rubber mallet

may be required for secure attachment).

10. P lace foot block shaft beside mounted stair panel, mark above mounting hole (also allow for bottom rail clearance) and cut to length.

3

Have Questions? 1–800–BUY–TREX

NOTE: Construction methods are always improving. Please ensure you have the most up-to-date installation instructions by visiting: trex.com

SEALST-0826

Made with FlippingBook Digital Proposal Creator