Würth Perfect Repair

THEME AUTOMOTIVE GLAZING

WÜRTH PERFECT REPAIR passion needs performance

THEME AUTOMOTIVE GLAZING

Removal

4–7

Read more about windshield replace- ment in just four steps: SCAN NOW!

Removal of decorative moldings Removal of the wiper arm Windshield removal

8–13

Windshield removal using wire or knife Preparation and bonding

14–19

Cleaning Pre-treatment Bonding Windshield installation and assembly 20–21 Stone chip repair 22 Accessories 23–32 Personal protection Glue guns Assembly aids Internal/external vehicle protection Cleaning accessories Wiper blades Other Calibration 33

THEME AUTOMOTIVE GLAZING

Preparation and bonding

Windshield instal- lation & assembly

Removal

Windshield removal using wire or knife Windshield removal

Removal of decorative moldings | Removal of the wiper arm

Cleaning | Pre-treatment | Bonding

Good to know! Unrestricted access is required when replacing the windshield. Würth offers you the correct tools for removing all external parts such as wipers and decorative moldings.

Removing the parts Unrestricted access is required for the removal of the wind- shield. Therefore you must first remove all external parts. • Removing decorative moldings: It is fast and simple to remove the clips using the 4-piece Würth assembly wedge set. The glass fiber-reinforced plastic prevents the bodywork from becoming deformed or damaged during removal. • Removing the windshield wiper: Loosen the dust caps using the clip remover and then the screw connection on the wiper arm using the lever reversible ratchet. Simply remove the wiper arms using the pole terminal puller with a push-and-pull movement. Attention: When aluminum and steel meet, this may lead to contact corrosion on the connection. Damage or deformations are therefore to be expected when this connection is released.

Würth Perfection Line Windshield Replace- ment Video Instructions: SCAN NOW!

THEME AUTOMOTIVE GLAZING

Stone chip repair

Calibration

bly wedge. ◯ i

due to the fiberglass-reinforced plastic. ◯ i

To ensure that decorative molding are removed safely, we recommend using our plastic assem-

All parts that are attached by clips can be easily removed. There is no damage to the bodywork

Assembly wedge set For the removal of interior linings and lifting seals

Assembly wedge set 12-piece set for the removal of interior linings and fastening elements. Art. no. 0714 58 245 PU/pcs. 1

Art. no. 0714 58 248 PU/pcs. 1

Clip remover For easy removal of clips on interior linings. Length: 280 mm Art. no. 0714 34 52 PU/pcs. 1

Clip remover For easy removal of brackets and clips. Art. no. 0714 34 53 PU/pcs. 1 Art. no. 0714 34 54 PU/pcs. 1

Removal and lifting wedge The very flat tapered wedge side allows optimum removal of plastic clips.

Length: 165mm Art. no. 1952 001 366

THEME AUTOMOTIVE GLAZING

Preparation and bonding

Windshield instal- lation & assembly

Removal

Windshield removal using wire or knife Windshield removal

Removal of decorative moldings | Removal of the wiper arm

Cleaning | Pre-treatment | Bonding

Wiper arm puller with adjustable fork Special design with continuously adjustable fork width (spring mecha- nism) for removing the wiper arms from the wiper arm shaft.

Wiper arm puller master set

Universal puller With special hook and hook clamp. For cars, vans, commercial vehicles, buses,

18 pieces. Universal assortment offering the greatest possible market and model coverage for removing wiper arms from the wiper arm shaft. For the most common car models.

Art. no. 1952 001 008 PU/pcs. 1 construction vehicles and agricultural machinery.

Art. no. 1952 004 445 PU/pcs. 1

Art. no. 1952 004 440 PU/pcs. 1

THEME AUTOMOTIVE GLAZING

Stone chip repair

Calibration

Dust-proof head 1 2-way seal for better protection against con- tamination 2 Drive, square: Robust and extremely resistant Maintenance-free – long-lasting lubrication of mechanics is guaranteed.

1/2 inch lever reversible ratchet, dust-proof Dust-proof ratchet for long service life even under difficult working conditions. • Drive: 12.5–1/2“ • Standard: DIN 3122, ISO 3315 • Reversing lever for clockwise/anti-clockwise rotation • Geometry: Depressed ratchet body for more freedom of movement

Art. no. 0712 012 03 PU/pcs. 1

Fine-toothed Mainte-

nance-free

Tool with additional uses: The maintenance-free ratchet tool SCAN NOW!

THEME AUTOMOTIVE GLAZING

Preparation and bonding

Windshield instal- lation & assembly

Removal

Windshield removal using wire or knife Windshield removal

Removal of decorative moldings | Removal of the wiper arm

Cleaning | Pre-treatment | Bonding

Good to know! Windshield removal is possible through various work steps and removal systems. You can get the right tool from us for every application.

Removing the windshield perfectly It takes several, consecutive steps to remove the front windshield. The wind- shield removal set includes the right tool for every step: • To remove the windshield, you must pierce the adhesive bead using the probe included in the set. The cutting cord is suitable for windshields with a particularly narrow clearance. Our tip: Pro- tect the surrounding bodywork attachments with Würth fabric adhesive tape. • Fasten the cutting cord to the probe. When carrying out this step, ensure that the cutting cord is run under the edge of the windshield. • Attach the cord inside the vehicle to the removal tool: Ensure that you then position the tool opposite the puncture site therefore generating sufficient vacuum. Perfect hold is guaranteed when you activate the pump function until the red marking can no longer be seen. Repeat this step three times to reach each corner of the screen. • Cut back the adhesive bead using the universal scraper and knife set.

Removing the wind- shield perfectly. Video

instructions: SCAN NOW!

THEME AUTOMOTIVE GLAZING

Stone chip repair

Calibration

Windshield removal set Mini 9 pieces. For simple and cost-effective removal of bonded vehicle windshields and side windows. 1 x universal holder C 6.3 (1/4 in); 1 x wire probe; 1 x protector included in windshield removal set small; 1 x removal cutting wire 65 m, cord thickness: 1.1 mm; 1 x mounting hook for windshield removal set mini; 1 x assembly wedge; 1 x 1C cutter knife with slider; 1 x system case 4.4.2

Art. no. 0714 58 230 PU/pcs. 1

ONE SYSTEM, ONE MAN, A PERFECT RESULT! The use of cutting cord and protector means that the inner paneling does not need to be removed.

THEME AUTOMOTIVE GLAZING

Preparation and bonding

Windshield instal- lation & assembly

Removal

Windshield removal using wire or knife Windshield removal

Removal of decorative moldings | Removal of the wiper arm

Cleaning | Pre-treatment | Bonding

Basic windshield removal set 7 pcs. For easy, cost-effective removal of bonded car windshields and side windows.

Especially suitable for one-person operation. To be used with wire and cutting cord. Scope of delivery 1 x windshield removal device, 1 x cutting cord, Art.no. 071458 282, 1 x cutting thread, Art. no. 071458 283, 1 x mounting hook Art. 071458 214, 1 x wire feeder , Art. no. 071458 213, 1 x protector, Art. no. 071458 219, 1 x Orsy 100 case

Art. no. 0714 58 229 PU/pcs. 1

Wind shield cutting wire For damage-free removal of vehicle windshields with a par- ticularly narrow measuring clearance.

Special steel cutting wire Good flexibility for higher tensile strength, especially suit - able for work in hard-to-reach places.

Width: 0.6 mm Height: 0.6 mm Length: 50 m Art. no. 0714 58 282 PU/pcs. 1

Length: 25 m Color: Pink Art. no. 0714 58 283 PU/pcs. 1

Protector set Protects interior linings and dashboards.

10 THEME AUTOMOTIVE GLAZING Wire probe For penetrating the adhesive bead and pulling in the cutting wire. Art. no. 0714 58 213 PU/pcs. 1

Width: 450 mm Height: 300 mm Art. no. 0714 58 217 PU/pcs. 1

Width: 270 mm Height: 200 mm Art. no. 0714 58 218 PU/pcs. 1

Stone chip repair

Calibration

Square stainless steel cutting wire Extremely smooth surfaces, cuts through adhesive bead more easily. Length: 50 m Art. no. 0891 656 PU/pcs. 1

Round-wire cutting wire Braided for high cutting capacity despite lack of cutting edges. Length: 22.5 m Art. no. 0714 58 28 PU/pcs. 1

Holding tool Long design. Art. no. 0714 58 24 PU/pcs. 1

Replacement knurled thumb screw For holding tool. Art. no. 071458 24 Art. no. 0714 58 241 PU/pcs. 1

Pull handle For cutting wire. Art. no. 0714 58 23 PU/pcs. 1

Blade for windshield removal knife Standard small

Art. no. 0714 582 101 PU/pcs. 1 Standard large Art. no. 0714 582 102 PU/pcs. 1 Extra long Art. no. 0714 582 103 PU/pcs. 1

Windshield removal knife Bonded car windows can be removed by one person.

Includes 1 x blade for windshield removal knife

Art. no. 0714 582 10 PU/pcs. 1

11 THEME AUTOMOTIVE GLAZING

Preparation and bonding

Windshield instal- lation & assembly

Removal

Windshield removal using wire or knife Windshield removal

Removal of decorative moldings | Removal of the wiper arm

Cleaning | Pre-treatment | Bonding

Pneumatic multi-cutter DMS 2 Powerful device for removing bonded vehicle windshields, for cutting work in the bodywork sector and grinding work on corners and edges.

Multi-cutter EMS 450 1.7 Compact Extremely powerful multi-cutter with quick-action clamping system for the automotive sector. Continuous speed regulation the machine adapts the tool perfectly to the

For restricted use, only for cutting knives without rotation speed indication! Scope of delivery 1 x open-ended wrench; 1 x two-hole wrench; 1 x mist lubricator

respective application. Scope of delivery 1 x sharpening stone; 1 x case insert multi-cutter EMS; 1 x system case 8.4.2

Art. no. 5706 103 1 PU/pcs. 1

Art. no. 0703 862 1 PU/pcs. 1

Vehicle glass trade set for electric multi-cutter 9pcs. This set is able to cut out almost 98% of all windshields.

Art. no. 0696 606 PU/pcs. 1

12 THEME AUTOMOTIVE GLAZING

Stone chip repair

Calibration

Attach an adhesive strip to the windshield and bodywork externally, to prevent the windshield slipping when completely separat - ed from the adhesive bead. ◯ i

Vacuum lifter With 2 movable heads

With 2 movable heads, especially for trans- port of convex car windshields.

Diameter: 120 mm Art. no. 0714 58 20 PU/pcs. 1

Scraper blade Blade width: 12mm Art. no. 0715 66 42 PU/pcs. 1 Blade width: 16mm Art. no. 0715 66 43 PU/pcs. 1 Blade width: 20mm Art. no. 0715 66 44 PU/pcs. 1 Blade width: 16mm, angled Art. no. 0715 66 45 PU/pcs. 1

◯ i Cut the remaining bead back to approx. 2 mm with the universal scraper and blade set.

Scraper and blade set 27-piece scraper replacement with 4 different scraper blades and carpet knife.

1x carpet knife; 5x trapezoidal blade; 1x scraper handle; scraper blade: 5x blade width: 12 mm, 5x blade width: 16 mm, 5x blade width: 20 mm, 5x blade width: 16 mm, angled

Scraper handle Ergonomic 2K handle with blade clamping for scraper blades. Art. no. 0715 66 41 PU/pcs. 1

Art. no. 0715 66 40 PU/pcs. 1

13 THEME AUTOMOTIVE GLAZING

Preparation and bonding

Windshield instal- lation & assembly

Removal

Windshield removal using wire or knife Windshield removal

Removal of decorative moldings | Removal of the wiper arm

Cleaning | Pre-treatment | Bonding

Good to know! Place the new windshield on the bodywork flange using the suction lifter in order to determine the cor - rect position of the windshield. Stick an adhesive strip on the left and right of the windshield and the bodywork when you have determined the optimum screen position.

14 THEME AUTOMOTIVE GLAZING

Stone chip repair

Calibration

Preparing application surfaces and bonding correctly The application surface must be clean so that the screen can be securely and solidly bonded. Therefore your preparation must be very thorough. Special Würth cleaning agents will help you: • Clean the bodywork flange and screen: Remove the heavy dirt with active cleaner and a special cloth, for e.g. the Tex-Rein cleaning cloth. Take care to clean the bonding surfaces thoroughly. • Prime the bodywork flange and screen: Before inserting the new screen, prime the bodywork flange in order to create the primer for the window adhesive. Use the Varioprimer safe+easy for this for the perfect result.

15 THEME AUTOMOTIVE GLAZING

Preparation and bonding

Windshield instal- lation & assembly

Removal

Windshield removal using wire or knife Windshield removal

Removal of decorative moldings | Removal of the wiper arm

Cleaning | Pre-treatment | Bonding

◯ i

Foldaway and height adjustable.

Wind protection screen stands For car and truck windshields. Max. load capacity 55kg

Combination workbenches For car and truck windshields and assembly parts.

Length: 1,150 mm Width: 450 mm Art. no. 0714 58 262 PU/pcs. 1

Length: 1,150 mm Width: 500 mm Art. no. 0714 58 261 PU/pcs. 1

Abrasive cleaning sponge For thorough cleaning of stubborn dirt on glass panes and ceramic screen-printed edges. Color: Gray L x W x H: 134 x 60 x 30 mm Art. no. 0899 700 407 PU/pcs. 10

Cleaning cloth Tex-Rein Extra fine cleaning cloth for dust and lint-sensitive areas.

Color: Turquoise Art. no. 0899 810 PU/pcs 1/4

Glass cleaner Active cleaner Special cleaner for pre-treatment in window repair.

Glass cleaner For streak-free and thorough cleaning. Contents: 500 ml Color: Green Art. no. 0890 220 01 PU/pcs 1/12

Contents: 500 ml Color: Colorless Art. no. 0890 024 1 PU/pcs. 1

Contents: 5 liters Color: Green Art. no. 0890 220 02 PU/pcs. 1

16 THEME AUTOMOTIVE GLAZING

Stone chip repair

Calibration

IMPORTANT: Please observe the drying times for all chemical products! ◯ i

PRE-TREATMENT: First check the bodywork for damage, corrosion and paint damage. Prime the adhesion surfaces before bonding the new window in order to form the primer for the window adhesive.

Primer brush For windshield installation

Length: 11 cm Art. no. 0891 650 PU/pcs. 10

Sensor repair pad set 26 pieces. Silicon pads for re-using rain and light sensors when replacing the wind- shield.

Art. no. 0890 024 010 PU/pcs. 1

Window glazing tape For windshield installation

Sensor repair pad Silicon pads for re-using rain and light sensors when replacing the windshield.

Color: Black Roll length: 12 m Width: 4 mm Art. no. 0891 655 PU/pcs. 4

Art. no. 0890 025 029-035 PU/pcs. 5

Adhesion promoters, corrosion protection, activator and UV protection. ◯ i

Adhesion promoter Contact Clean Special clear Adhesion promoter for window adhesive RAPID (German Federal Law Gazette)

Varioprimer safe + easy Multi-purpose pre-treatment agent for all common substrates found in replacement glazing.

Contents: 250 ml Color: Transparent Art. no. 0890 024 500 PU/pcs 1/6

Contents: 10 ml Color: Black Art. no. 0890 024 010 PU/pcs. 12

Contents: 20 ml Color: Black Art. no. 0890 024 020 PU/pcs 1/25

Contents: 100 ml Color: Black Art. no. 0890 024 100 PU/pcs 1/12

17 THEME AUTOMOTIVE GLAZING

Preparation and bonding

Windshield instal- lation & assembly

Removal

Windshield removal using wire or knife Windshield removal

Removal of decorative moldings | Removal of the wiper arm

Cleaning | Pre-treatment | Bonding

Good to know! BONDING: After you have perfectly prepared everything and observed the ventilation times, the win- dow can be bonded and then inserted. IMPORTANT: The ventilation time of the window adhesive can vary in terms of temperature and humidity.

Window adhesive Ultimate professional set Usable in any season, high-modulus, non-conducting 1C window adhesive (400 ml). 1 x Ultimate window adhesive; 1 x Varioprimer safe + easy; 1 x primer brush; 1 x standard window application nozzle

Window adhesive Ultimate complete set Usable in any season, high-modulus, non-conducting 1C window adhesive. 1 x Ultimate window adhesive; 1 x Varioprimer safe + easy; 1 x primer brush; 1 x standard window application nozzle

Contents: 310 ml Art. no. 0890 023 800 PU/pcs. 1

Contents: 400 ml Art. no. 0890 023 830 PU/pcs. 1

Similar image

Window adhesive Expert Set, 310ml Elastic 1C window adhesive with excellent stability.

Window adhesive Expert set Elastic 1C window adhesive (400 ml) with excellent stability.

1 x Expert plus window adhesive; 1 x Varioprimer safe + easy; 1 x primer brush

Can be used for all common car types.

Art. no. 0890 023 703 PU/pcs 1/12

Art. no. 0890 023 705 PU/pcs 1/12

18 THEME AUTOMOTIVE GLAZING

Stone chip repair

Calibration

Window adhesive Expert cargo 1C window adhesive for commercial vehicles, buses and rail vehicles.

Window adhesive Rapid Fast, high-modulus 1C window adhesive for primer-free working.

Contents: 600 ml Art. no. 0890 023 600 PU/pcs 1/12

Contents: 310 ml Art. no. 0890 023 50 PU/pcs 1/12

Contents: 400 ml Art. no. 0890 023 60 PU/pcs 1/12

Usable in any season!

Window adhesive Expert Elastic 1C window adhesive with excel - lent stability.

Window adhesive Ultimate Usable in any season, high-modulus, non-conducting 1C window adhesive.

Contents: 310 ml Art. no. 0890 023 702 PU/pcs 1/12

Contents: 400ml Art. no. 0890 023 704 PU/pcs 1/15

Contents: 310 ml Art. no. 0890 023 801 PU/pcs 1/12

Contents: 400 ml Art. no. 0890 023 831 PU/pcs 1/15

Attach an adhesive strip to the windshield and bodywork externally, to prevent the windshield slipping when completely separating the adhe- sive bead.

◯ i

Vacuum lifter With 2 move- able heads

Fabric adhesive tape 4613 Easy fabric adhesive tape for general applications in trade and industry. Width: 48 mm Length: 50 m Color: Silver-colored Art. no. 0992 650 1 PU/pcs 1/24 Width: 48 mm Length: 50 m Color: Black Art. no. 0992 650 2 PU/pcs 1/24

Diameter: 120 mm Art. no. 0714 58 20 PU/pcs. 1 Especially for transport of convex car windshields.

19 THEME AUTOMOTIVE GLAZING

Preparation and bonding

Windshield instal- lation & assembly

Removal

Windshield removal using wire or knife Windshield removal

Removal of decorative moldings | Removal of the wiper arm

Cleaning | Pre-treatment | Bonding

Fitting the new windshield After preparation the final step is bonding. The Würth Perfect Repair products deliver a convincing result: • Apply the adhesive bead: After sufficient drying time for the primer, you can apply the window adhesive. The pre-formed application nozzle allows even application. • Insert the window: Position the window on the bodywork flange. For optimum adhesive bonding press the window evenly and lightly on the bodywork afterward. Secure the window in to the connection using fabric adhesive tape on the bodywork. This prevents the window slipping while the adhesive hardens. • Assemble the attachments: Almost done! The final step is to assemble the previously dis- mantled attachments again in reverse order.

Fitting the new wind- shield perfectly. Video instructions: SCAN NOW!

20 THEME AUTOMOTIVE GLAZING

Stone chip repair

Calibration

21 THEME AUTOMOTIVE GLAZING

Preparation and bonding

Windshield instal- lation & assembly

Removal

Windshield removal using wire or knife Windshield removal

Removal of decorative moldings | Removal of the wiper arm

Cleaning | Pre-treatment | Bonding

Repairing stone chip damage perfectly. Video instructions: SCAN NOW!

Window repair set, Professional, 146 pieces For repairing laminated windshields damaged by stone chips.

1 vacuum/pressure pump, 1 vacuum/pressure hose, 1 suction holder with injector, 1 UV lamp, 1 inspection mirror, 25 hardening films, 6 scraper blades, 10 sets of Repair Resin "Polymer II", 10 sets of Repair Resin "Crack Fill", 10 sets of Repair Resin "Extreme II", 1 replacement seal ring for injector, 4 batteries, 1 operating instructions., other.

Art. no. 5964 089 380 PU/pcs. 1

Windscreen repair system, 25 pieces For repairing laminated windshields damaged by stone chips. Complete package

• The box contains a complete instruction manual and a demonstration video on the CD-ROM • Contains everything you need to do the job • 230 V or 12 V power supply via cigarette lighter socket

The kit also includes:

• Centering tip, 1 pc. • Gas lighter, 1 pc. • Elastic ball, 1 pc.

Art.nr. 0893 458 0 PU/pcs. 1

Repair filler resin for window repairs Filler resin for universal use

Art. no. 0890 016 PU/pcs. 5

Art. no. 0890 016 100 PU/pcs. 2

22 THEME AUTOMOTIVE GLAZING

Stone chip repair

Calibration

Safety first: Avoiding work-related accidents. Protect yourself and your employees when replacing the window. You should protect your eyes and hands especially. Wear disposable gloves during the work. These must be tough and protect your skin from chemicals.

Disposable gloves Nitrile grip Unique, diamond structure for optimum grip.

Nitrile disposable gloves Black powder-free

Safety goggles Cetus ® X- treme Maximum protection in a casual design

Size: M–XL Art. no. 0899 470 37. PU/pcs. 100

Art. no. 0899 102 380 PU/pcs. 1

Sizes: M–XXL Art. no. 0899 470 12. PU/pcs 50/500

23 THEME AUTOMOTIVE GLAZING

Preparation and bonding

Windshield instal- lation & assembly

Removal

Windshield removal using wire or knife Windshield removal

Removal of decorative moldings | Removal of the wiper arm

Cleaning | Pre-treatment | Bonding

Symbolic image

Manual cartridge gun, high-quality For 310 ml cartridges. Art. no. 0891 00 PU/pcs 1/10

24 THEME AUTOMOTIVE GLAZING

Stone chip repair

Calibration

Battery application gun AKP 18-A-600 Powerful 18 V application gun for medium to high-viscosity adhesive and sealant from 310 ml cartridges and 400 ml and 600 ml bags. Ideal for window adhesive. 1 x charger AL-60-AS-LI; 1 x battery LI-AS-18 V; 1 x press plate for battery application gun AKP; 1 x control rod for battery application gun; 1 x alu - minum application tube AKP 12/18, 600 ml; 1 x end cap for cordless application gun AKP; 1 x pressure plate for cordless application gun AKP; 1 x nylon transport bag

Art. no. 5700 600 1 PU/pcs. 1

Standard window application nozzle For bag goods Color: Transparent Art. no. 0891 651 0 PU/pcs. 12

Adaptor For bag goods Art. no. 0891 651 10 PU/pcs 1/12

Art. no. 0891 023 001* PU/pcs. 12 Window application nozzle

Conversion kit

On 400ml bag Art. no. 5700 600 400* PU/pcs. 1

* Order via 1999 100

25 THEME AUTOMOTIVE GLAZING

Preparation and bonding

Windshield instal- lation & assembly

Removal

Windshield removal using wire or knife Windshield removal

Removal of decorative moldings | Removal of the wiper arm

Cleaning | Pre-treatment | Bonding

◯ i

Foldaway and height adjustable.

Combination workbenches For car and truck windshields and assembly parts.

Wind protection screen stands For car and truck windshields. Max. load capacity 55kg

Length: 1,150 mm Width: 500 mm Art. no. 0714 58 261 PU/pcs. 1

Length: 1,150 mm Width: 450 mm Art. no. 0714 58 262 PU/pcs. 1

26 THEME AUTOMOTIVE GLAZING

Stone chip repair

Calibration

Seat protector, nylon Robust and reusable

PE seat protector on roll

Length x width: 1,350 x 760 mm Art. no. 0899 500 010 PU/pcs. 1

Length x width: 1,300 x 790 mm Art. no. 0899 500 01 PU/pcs. 1

Replacement roll

Steering wheel protector, nylon Elasticated around the outside for a perfect fit. Width: 100 mm Art. no. 0899 500 020 PU/pcs. 1

Adhesive film for steering wheel protection With red changeable handle

Art. no. 0899 500 028 PU/pcs. 1

Length: 300 m Width: 125 mm Art. no. 0899 500 027 PU/pcs. 1

27 THEME AUTOMOTIVE GLAZING

Preparation and bonding

Windshield instal- lation & assembly

Removal

Windshield removal using wire or knife Windshield removal

Removal of decorative moldings | Removal of the wiper arm

Cleaning | Pre-treatment | Bonding

Wing protector with sewn-in sand bags Protects against damage during repair and maintenance work.

Length: 1100 mm Width: 700 mm Color: Black Art. no. 0899 601 PU/pcs. 1

Universal car front protector Prevents scratches to paintwork which can occur while working on vehicles through dropped tools and component installation. Supplied in practical carrying bag.

Length: 3 m Width: 1 m Color: Black Art. no. 0899 603 PU/pcs. 1

Universal car protector Versatile car protector with non-slip surface.

Length: 900 mm Width: 610 mm Color: Black Art. no. 0899 600 3 PU/pcs. 1

28 THEME AUTOMOTIVE GLAZING

Stone chip repair

Calibration

Cleaning cloth Tex-Rein Extra fine cleaning cloth for dust and lint-sensitive areas. Color: Turquoise Art. no. 0899 810 PU/pcs 1/4

Cleaning paper ECO LINE Cleaning paper ECO LINE on rolls

Roll length: 360 m Art. no. 0899 800 823 PU/pcs. 2

Microactive cloth Basic Microfil cloth Basic.

Footwell protector PE Fuel and lubricant resistant

Length x width: 50 x 38 cm Art. no. 0899 500 03 PU/pcs. 500

Length x width: 40 x 40 cm Color: Green Art. no. 0899 900 050 PU/pcs. 50

29 THEME AUTOMOTIVE GLAZING

Preparation and bonding

Windshield instal- lation & assembly

Removal

Windshield removal using wire or knife Windshield removal

Removal of decorative moldings | Removal of the wiper arm

Cleaning | Pre-treatment | Bonding

Glass cleaner For streak-free and thorough cleaning.

Active windshield cleaner Cleaning foam for glass and smooth surfaces.

Color: Green

Color: Colorless

Contents: 500 ml Art. no. 0890 220 01 PU/pcs 1/12

Contents: 5 liters Art. no. 0890 220 02 PU/pcs. 1

Contents: 600 ml Art. no. 0890 255 PU/pcs 1/24 Contents: 500 ml Art. no. 0890 25 PU/pcs 1/12

Contents: 20 liters Art. no. 0890 252 0 PU/pcs. 1 Contents: 5 liters Art. no. 0890 250 5 PU/pcs. 1

Isopropanol cleaner IPA cleaner For universal use

Interior cleaner Special cleaning foam with anti-static addi- tive for the entire vehicle interior.

Leaves no stains or streaks on glass surfaces as the product evaporates completely and residue-free after a short period.

Cleans all painted and plastic parts, glass surfaces and upholstery of nicotine, dirt and dust.

Contents: 500 ml Color: Transparent Art. no. 0893 223 500 PU/pcs 1/12

Contents: 500 ml Art. no. 0893 033 PU/pcs 1/24

30 THEME AUTOMOTIVE GLAZING

Stone chip repair

Calibration

ORDER VIA workshop equipment specialist

ACS Cars Drive assistance systems must be regularly checked and calibrated. With ACS Cars we provide the optimum solution for statistical camera calibration for everyday workshop demands. • Time-saving: Calibration in less than 15 minutes • Single: One-person operation instead of group working • Flexible. From small cars to vans

31 THEME AUTOMOTIVE GLAZING

THEME AUTOMOTIVE GLAZING

Adolf Würth GmbH & Co. KG 74650 Künzelsau, Germany

Our general terms of sale, delivery and payment at www.wuerth.de/AGB apply. Reproduction in whole or in part without prior approval is strictly prohibited. IDA - MWC - XXX - XXX -11/19 Printed on environmentally friendly paper. We reserve the right to make any changes we deem necessary to improve the quality of the product, even without prior announcement or notification. Illustrations may be sample illustrations which could differ in appearance from the actual goods delivered. Errors excepted. We do not assume liability for printing errors. Our general terms and conditions apply.

Würth Handelsges.m.b.H. Würth Straße 1 3071 Böheimkirchen Tel. +43 50 8242–0 Fax +43 50 8242–53333 Phone: +49 (0)7940 15 - 0 Fax: +49 (0)7940 15-1000 info@wuerth.com www.wuerth.de

Reprinting only with permission AU_BR_WPL_Autoglas_2020

We reserve the right to make changes to products that we consider to be for the purposes of improving quality without prior notice and at any time. Illustrations may be examples; the goods delivered may appear different than these illustrations. Subject to errors, we assume no liability for printing errors. Our general terms and conditions of business apply.

info@wuerth.at www.wuerth.at

Innovation and competence for your workshop Air-conditioning disin- fectant and cleaning Air-conditioning service

Everything for your testing facility S57a Testing

Lifting platforms to gearbox lifts Lifting equipment

Everything for balancing and assembling Tires and wheels

Innovative axle measurement Chassis

Welding, pressing, milling, drilling Metalworking

Efficient compressors Compressed air supply

Painting and bodywork requirements Bodywork

Safe storage Hazardous materials management

36 THEME AUTOMOTIVE GLAZING Cleaning up! Cleaning equipment

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32

Made with FlippingBook Annual report maker