SyncroFlo Turbostream

VERTICAL TURBINE TURBOSTREAM

Experience gained from extreme environments such as power generation and off-shore oil & gas installations has led to the creation of SyncroFlo's FM/UL Vertical Turbine range of pumps approved for industrial, commercial and municipal applications. When water sources are located below ground or deck level, the best technical pumping solution is the Vertically Suspended Multi Stage Turbine pump. With this type of unit the impellers are fully immersed in the water, maintaining prime at all times. The pumps are driven by vertical electric motors or by diesel engines through a right angle gearbox. While SyncroFlo Vertical Turbine pumps can be custom engineered for oil and gas industry, Cooling fresh water or sea water, general water supply, wash-down water, drill water, oils and controlling spillages. For platform or jetty locations, a below-deck discharge can be provided. These pumps can also handle slightly turbid water, which makes them ideal for being used as intake pumps, for golf course irrigation and for other commercial applications.

TYPICAL INSTALLATIONS: • Office Buildings • Hospitals • Airports • Manufacturing Facilities • Power Stations • Pharmaceutical Facilities • Oil & Gas TYPICAL APPLICATIONS: • Water Treatment • Potable Water Supply • Sewage Stations • Waste Water Services • Flood Control • Irrigation

SYNCROFLO -TURBOSTREAM

SyncroFlo, Inc.

2905 Pacific Drive Norcross, GA 30071 Tel: (770) 447-4443 www.syncroflo.com

TURBOSTREAM

Double shrouded impeller is provided with vanes on back shroud to balance axial thrust, larger impeller uses dual wear ring with balance holes.

All Cast iron discharge head offers excellent weight carrying capacity and vibration dampening capabilities.

Quick disconnect threaded coupling standard on smaller shaft sizes and split muff coupling standard with large shafts.

Cartridge seal makes it easy to replace those quickly if needed.

Flanged column pipes are standard, which allows quicker assembly and disassembly of pumps and results in more accurate assembly.

Discharge head is cast and hydraulically designed to offer minimum frictional loss.

Discharge head is cast and hydraulically designed to offer minimum frictional loss.

Product lubricated bearings housed in all cast bearing retainers.

Pump unit is Coated from inside which improves already efficient hydraulics.

All cast bowls construction with zero radial thrust.

Impellers are individually secured with collets.

Sand collar at bottom prevents accumulation of dirt and sand in bell mouth bearing.

All stainless steel impellers provided with serrated casing wear rings to improve volumetric efficiency of pump.

CONFIGURATION Vertical lineshaft, vertical electro submersible, vertical electric motor or engine driven, dry or wet well

FEATURES • Space saving

• Diffuser bowls ensure balanced axial loading • Soft packing or mechanical seals • API construction • Dry and wet well installations

• Low maintenance costs • High hydraulic efficiency • Priming problems eliminated. Pump end submerged in liquid • 60 models, with bowls, heads and columns optimised for performance and cost • Wide choice of materials

DISCHARGE & PERFORMANCE  • 4 in to 87 in • Outputs up to 11,095 US.gpm • Heads up to 333 ft

SYNCROFLO - TURBOSTREAM

Page 1 Page 2

Made with FlippingBook - professional solution for displaying marketing and sales documents online