2. P ermits are not included. It is the responsibility of the end user to acquire all permits to install a booth.
3. A FIRE SUP RES SION SYSTEM IS NOT INCLUDED WITH THE BOOTH BUT IT IS REQUIRED. Generally this is supplied and installed by a licensed local installer. 4. Electr ic al installation must be performed by a licensed electrician familiar with national, local electrical codes and regulations in your location. 6.2 Booth Assembly When assembling booth, leave bolts finger tight until each section is assembled. All flanges should face outward. Install bolts from inside so nut is outside booth. Use a drift pin to align panel holes when two or more panels are difficult to align by hand. Lay out all floor channel for exhaust chamber and walls. As you attach wall panels together, they will also bolt to the floor channel.
Prevent serious injury or death. Most booth components weigh 50-500 lbs. Use adequate lifting devices to raise, move and install booth components. WARNING Prevent equipment damage. Spray booth roof will not support a person. Do not attempt to stand or walk on spray booth roof. NOTICE
37
Made with FlippingBook - professional solution for displaying marketing and sales documents online