6.5 Tubeaxial Fan
WARNING
Fan assembly is heavy. Fan assembly weight is approximately 50 - 200 lbs., depending on model. Use an adequate lifting device to install fan assembly.
WARNING
Prevent serious injury or death. Electrical installations must be performed by qualified electricians. Installation must conform to all national, local, and provincial codes and standards.
The fan and motor assembly will bolt to exhaust roof panel.
Checklist Check the following items prior to start up:
1. Motors wired for proper voltage. 2. All fans and motors turn freely. 3. Lubricate all bearings. 4. Check installation of exhaust fan for proper airflow direction. Generally, exhaust fan airflow is out of booth. 5. Listen for excessive or unusual noise when booth is operating. 6. When door limit switches are applicable, operate the booth and open any door to see if spray gun will shut down. This will verify proper safety operation of the booth.
42
Made with FlippingBook - professional solution for displaying marketing and sales documents online