Technical training
Blade Repair Standard / V4 2023-05-02
The participants shall:
Engage in a discussion and share their understanding of the health and safety risks associated with working with a grinder
Practise the ability to:
a. select and correctly use the appropriate PPE for the task and perform a pre-use tool inspection before working with a grinder
b.
recognise and replace a worn-out grinding disc
c. safely use a grinder to accurately grind composite materials to reveal the fibre orientation, and create overlaps and/or scarf joints of the correct dimensions in each layer of laminate
Note
These skills and abilities shall be assessed in each of the following repair exercises.
SURFACE REPAIRS
180 min.
The aim of the lesson is to enable the participants to repair minor damage to the surface of the wind turbine blade safely and effectively.
After having successfully completed this lesson of the Blade Repair Module, the participants can:
213) Take responsibility for repairing minor damage to the surface of the wind turbine blade safely and effectively (Ability, intermediate level)
ELEMENT 25.1 - MINIMISE RISKS ASSOCIATED WITH COMPOSITE FIBRE WORK
Learning objectives:
214) The participants can act independently in applying the knowledge gained during the general safety lessons to the working environment to minimise the risks associated with composite repair work (Ability, intermediate level) 215) The participants can act independently in applying the knowledge gained during Lesson 18 (basic lamination) (Ability, intermediate level)
Global Wind Organisation©2023 / www.globalwindsafety.org
102 / 157
Made with FlippingBook - professional solution for displaying marketing and sales documents online