Technical training
Blade Repair Standard / V5 02052025
The instructor shall:
Explain the importance of repairing each layer of laminate that is damaged with the same type and weight of glass as the original
Demonstrate:
a. how to measure out and mark the overlaps and/or scarf joints for each repair layer
b. how to safely use a grinder to create overlaps and/or scarf joints of the correct dimension in each layer of existing fibre
c. how to use the created overlaps and/or scarf joints to measure and cut the required glass fibre mats for each repair layer
Facilitate practice to improve the participants’ ability to:
a. correctly measure and mark the overlaps and/or scarf joints for each repair layer
b. grind the existing laminate to create overlaps and/or scarf joints of the correct dimension for each repair layer, so that they have the correct surface finish for adhesion of the repair laminates
c. measure the created overlaps and/or scarf joints and cut repair glass fibre mats of the correct size and areal weight for each repair layer
Give constructive feedback on the participants above practice
The participants shall:
Practise the ability to:
a. correctly measure and mark the overlaps and/or scarf joints for each repair layer
b. grind the existing laminate to create overlaps and/or scarf joints of the correct dimension for each repair layer, so that they have the correct surface finish for adhesion of the repair laminates
c. measure the created overlaps and/or scarf joints and cut repair glass fibre mats of the correct size and areal weight for each repair layer
ELEMENT 26.5 - MIXING
Learning objectives:
Global Wind Organisation©2025 / www.globalwindsafety.org
116 / 164
Made with FlippingBook - professional solution for displaying marketing and sales documents online