Technical training
Blade Repair Standard / V5 02052025
Demonstrate:
a. how to apply vacuum consumables to a repair to achieve the specified vacuum levels as stated in a work instruction
b. the application of flash tape and tacky tape prior to applying resin to ensure that the flash tape and tacky tape will adhere to the surface. Demonstrate how to prevent contamination of the tape by using masking tape
c. how to record and document the vacuum level using a vacuum gauge
Facilitate practice to improve the participants abilities to:
a. apply vacuum consumables to the repair in the correct order and achieve the correct vacuum levels in accordance with a work instruction
b. read a vacuum gauge to verify and to be able to document the vacuum level applied to the repair
Give constructive feedback on the participants’ above practice
The participants shall:
Practise the ability to:
a. apply vacuum consumables to the repair in the correct order and achieve the correct vacuum levels in accordance with a work instruction
b. read a vacuum gauge to verify and to be able to document the vacuum level applied to the repair
ELEMENT 26.10 - CURING THE REPAIR USING HEATING BLANKETS
Learning objectives:
257) Participants can correctly perform curing of the repair using heating blankets and record the curing temperature (Skills, intermediate level)
258) Participants can act independently in finding the correct curing temperature and duration for the lamination resin being used for the repair (Ability, intermediate level)
259) Participants can act independently in adjusting and controlling the heating blanket to the correct curing temperature as displayed on the temperature gauge (Ability, intermediate level)
Global Wind Organisation©2025 / www.globalwindsafety.org
120 / 164
Made with FlippingBook - professional solution for displaying marketing and sales documents online