Technical training
Blade Repair Standard / V5 02052025
Ask the participants relevant questions about the limitations of using filler in terms of short pot life and layer thickness
Facilitate practice to improve the participants’ ability to apply filler with the correct tools to fill pinholes and small defects in the surface of a wind turbine blade
Give constructive feedback on the participants’ above explanations and ability to apply filler with the correct tools to fill pinholes and small defects in the surface of a wind turbine blade
The participants shall:
Share their understanding of the limitations of using filler in terms of short pot life and layer thickness
Practise the ability to apply filler with the correct tools to fill pinholes and small defects in the surface of a wind turbine blade
TRAILING EDGE REPAIRS
380 min.
The aim of the lesson is to enable the participants to conduct a laminate repair on the trailing edge area of a wind turbine blade safely and in accordance with a work instruction.
Trailing edge repairs must be carried out in accordance with a blade manufacturer’s work instruction. Where these are not impossible to obtain, then the training provider shall create a work instruction
Note
After having successfully completed this lesson of the Blade Repair Module, the participants can:
268) Take responsibility for conducting a laminate repair on the trailing edge area of a wind turbine blade safely and in accordance with a work instruction (Ability, intermediate level)
ELEMENT 28.1 - MINIMISE RISKS ASSOCIATED WITH COMPOSITE FIBRE WORK
Learning objective:
269) The participants can act independently in applying the knowledge gained during the general safety lessons to the working environment to minimise the risks associated with composite repair work (Ability, intermediate level)
Global Wind Organisation©2025 / www.globalwindsafety.org
124 / 164
Made with FlippingBook - professional solution for displaying marketing and sales documents online