Technical training
Blade Repair Standard / V4 2023-05-02
a. apply filler to a laminate repair on the leading edge and to shape the filler to approximately match the surrounding aerodynamic profile of the leading edge b. shape the cured filler with a sander so that it accurately matches the surrounding aerodynamic profile of the leading edge and has the correct surface finish for the adhesion of paint
SANDWICH PANEL REPAIR
180 min.
The aim of the lesson is to enable the participants to carry out laminate repairs on the inner and outer laminate of a sandwich panel safely and effectively.
After having successfully completed this lesson of the Blade Repair Module, the participants can:
281) Take responsibility for carrying out laminate repairs on the inner and outer laminate of a sandwich panel safely and effectively (Ability, intermediate level)
ELEMENT 30.1 - MINIMISE RISKS ASSOCIATED WITH COMPOSITE FIBRE WORK
Learning objective:
282) The participants can act independently in applying the knowledge gained during the general safety module to the working environment to minimise the risks associated with composite repair work (Ability, intermediate level)
The instructor shall:
Continually assess and give feedback on the participants’ ability to apply the knowledge gained during the general safety module to the working environment to mitigate the risks associated with composite repair work
The participants shall:
Practise the ability to apply the knowledge gained during the general safety and chemical safety modules to their working environment by correctly selecting and using PPE appropriate to the task in hand and to work in a safe manner with the materials and tools required for each process without help from the instructor
Global Wind Organisation©2023 / www.globalwindsafety.org
126 / 157
Made with FlippingBook - professional solution for displaying marketing and sales documents online