Technical training
Blade Repair Standard / V5 02052025
281) The participants can act independently in safely removing damaged material from the leading edge of a blade, while creating overlaps and/or scarf joints and the correct surface finish for subsequent repair layers (Ability, intermediate level) 282) The participants can act independently in laying up, and correctly using a vacuum and heat to cure a laminate repair on the leading edge with at least two layers of biax (Ability, intermediate level)
The instructor shall:
Demonstrate how to use a grinder to safely remove damaged material from the leading edge of a blade
Facilitate practice to improve the participants´ ability to:
a. safely remove damaged material from the leading edge of a blade, while creating overlaps and/or scarf joints and the correct surface finish for subsequent repair layers
b. lay up and correctly cure with a vacuum and heat a laminate repair on the leading edge with at least two layers of biax
Give constructive feedback on the participants’ above practice
The participants shall:
Practise the ability to:
a. safely remove damaged material from the leading edge of a blade, while creating overlaps and/or scarf joints and the correct surface finish for subsequent repair layers
b. lay up and correctly cure with a vacuum and heat a laminate repair on the leading edge with at least two layers of biax
ELEMENT 29.4 - RELOCATE LEADING EDGE
Learning objectives:
283) The participants can perform the recreation of the leading-edge profile using filler (Skills, intermediate level)
Global Wind Organisation©2025 / www.globalwindsafety.org
130 / 164
Made with FlippingBook - professional solution for displaying marketing and sales documents online