Technical training
Blade Repair Standard / V4 2023-05-02
Give constructive feedback on the participants’ above practice
The participants shall:
Practise the ability to:
a. determine the correct dimensions of the bond line in the trailing edge from a blade drawing or manufacturer’s work instruction
b.
drill injection and verification holes in the trailing edge
c. inject adhesive into the trailing edge in accordance with a work instruction
SUMMARY AND FINAL TEST
60 min.
The aims of the final test are to summarise the blade repair module and to assess the participants’ understanding of key theoretical and safety related elements of the module.
After having successfully completed this lesson of the Blade Repair Module, the participants can:
a.
Pass the final test
ELEMENT 32.2 - SUMMARY
The instructor shall:
Summarise the blade repair module referring to the learning objectives covered
ELEMENT 32.3 - FINAL TEST
The instructor shall:
Introduce the final test and explain the criteria for the test with reference to the participant performance assessment
Conduct the test in accordance with the participant performance assessment criteria
Upon completion of the test, check the participants’ answers and give feedback to the participants about the test results In the event that a participant does not pass the test, conduct an interview with the participant in accordance with the participant performance assessment
Global Wind Organisation©2023 / www.globalwindsafety.org
133 / 157
Made with FlippingBook - professional solution for displaying marketing and sales documents online