Technical training
Blade Repair Standard / V5 02052025
Ask the participants relevant questions about the difference between the curing methods listed in 14.6.1
Facilitate practice to improve the participants´ ability to use a technical data sheet to find the correct curing method and duration for a given material
Give constructive feedback on:
a. the participants´ explanations of the differences between the curing methods listed in 14.6.1
b. the participants‘ ability to use a technical data sheet to find the correct curing method and duration for a given material
The participants shall:
Explain the differences between the curing methods listed in 14.6.1
Practise the ability to use a technical data sheet to find the correct curing method and duration for a given material
TOOLS AND EQUIPMENT
40 min.
The aim of the lesson is to enable the participants to handle tools and equipment correctly in accordance with the task at hand during blade inspection and repair.
After having successfully completed this lesson of the Blade Repair Module, the participants can:
113) Show interest in handling tools and equipment required for blade inspection and repair safely and correctly (Ability, basic level)
ELEMENT 15.1 - MECHANICAL, ELECTRICAL AND PNEUMATIC PRINCIPLES
Learning objectives:
114) The participants can recognise basic mechanical, electrical, hydraulic principles, and associated risks (Knowledge, basic level)
115) The participants can explain how to utilise the tools required for blade inspection and repair in a correct and safe manner (Knowledge, intermediate level)
Global Wind Organisation©2025 / www.globalwindsafety.org
61 / 164
Made with FlippingBook - professional solution for displaying marketing and sales documents online