Technical training
Blade Repair Standard / V5 02052025
Explain and demonstrate how to correctly cure adhesive
Ask the participants relevant questions about the differences between structural and non-structural adhesives
Facilitate practice to improve the participants’ ability to cut the sandwich panel in half and to bond the two halves together to create a trailing edge section
Give constructive feedback on the participants’ explanations about the differences between structural and non-structural adhesives, and their ability to cut the sandwich panel in half and to bond the two halves together to create a trailing edge section
The participants shall:
Share their understanding of the differences between structural and non-structural adhesives
Practise the ability to cut the sandwich panel in half and to bond the two halves together to create a trailing edge section
PAINTING
120 min.
The aim of the lesson is to enable the participants to paint a blade to a specific layer of thickness safely and in accordance with a work instruction.
After having successfully completed this lesson of the Blade Repair Module, the participants can:
177) Take responsibility for painting a blade to a specific layer of thickness, safely and in accordance with a work instruction (Ability, intermediate level)
ELEMENT 20.1 - COMPLETION OF BLADE
Learning objectives:
178) The participants can apply the described paint layers and complete the blade build (Skills, intermediate level)
179) The participants can act independently in painting a blade to a specific layer of thickness in a safe manner (Ability, intermediate level)
Global Wind Organisation©2025 / www.globalwindsafety.org
91 / 164
Made with FlippingBook - professional solution for displaying marketing and sales documents online