Operations training
Slinger Signaller Standard / V4 2023-05-02
The instructor shall: Describe slinger signaller tasks where manual handling is relevant
Explain manual handling risks and mitigations when performing slinger signaller tasks, including lifting heavy equipment, using correct lifting technique, avoid overstretching, using teamwork etc and using lifting aids Facilitate manual handling exercises with group discussions on how a slinger signaller should handle equipment manually according to the equipment characteristics and potential hazards and risks Provide feedback to participants on relevant activities The participants shall: Engage in group discussions on what should, and should not, be lifted manually Discuss how to manually lift different types of equipment and what to be mindful of during the lifts Practise corrects lifting technique ELEMENT 3.2 - SLINGS Learning objective: 31) The participants can take responsibility for correct selection and usage of sling types (Ability, intermediate level) The instructor shall: Explain what type of slings are compatible with different types of loads Demonstrate the match between slings and hook e.g. ramshorn, single hook, safety hooks, using practical examples Explain and discuss how Dyneema slings differ from other sling types. Explain the care required for Dyneema slings. (Dyneema slings do not need to be present) Explain and demonstrate the importance of sling protection against sharp edges and capacity reduction due to this
Global Wind Organisation©2023 / www.globalwindsafety.org
28 / 73
Made with FlippingBook Annual report maker