Technical training
Basic Technical Training Standard / V9 2024-06-24
ELEMENT 5.2 - BOLT TORQUING
Learning objective:
51) Participants can act independently to, safely and correctly, torque bolts using at least two different toques settings with electric and hydraulic torquing tools and accessories (Ability, intermediate level)
The instructor shall:
Based on the scenario documents, facilitate activities where participants are required to use a combination of electric and hydraulic torquing tools to correctly carry out 1 stage and 2 stage torquing in accordance with the specifications described in the work instructions and bolt torquing manual (found in appendix 2)
Continuously assess participant engagement and learning by actively asking participants to share their understandings and reflect on their actions and considerations
Provide participants with instruction, guidance and feedback as required to ensure that learning objectives are met
The participants shall:
Complete the scenario-based activities to specification
Share understandings and considerations with instructors and other participants
Take responsibility for their learning by seeking guidance and clarification when in doubt
Instruction: the instructor should demonstrate how to correctly carryout 1 stage and 2 stage torquing prior to participants completing the activities, including a demonstration of how to mark the bolts.
Note
Safety: to reduce the risk of injury and damage to bolts and equipment it is recommended to use lower torque settings to complete practical torquing activities.
ELEMENT 5.3 - BOLT LOOSENING
Learning objective:
Global Wind Organisation / www.globalwindsafety.org
149 / 269
Made with FlippingBook Digital Proposal Creator