Technical training
Basic Technical Training Standard / V9 2024-06-24
a.
Mounting of ferrules
b.
Mounting in clamp and screw terminals
c.
Shield termination types
Practice correctly terminating main power cables (copper/aluminium):
a.
Mounting of cable lugs on busbar (correct torque)
b.
Mounting of cable to connectors (correct torque)
LESSON 10 - PRINCIPLES OF HYDRAULIC COMPLETION
40 min.
The aim of this lesson is to give participants basic knowledge of hydraulic completion.
ELEMENT 10.1 - INTRODUCTION TO HYDRAULIC COMPLETION
Learning objective:
86) The participants can recognise the principles and application of hydraulic completion (Knowledge, basic level)
The instructor shall:
Explain that there are hydraulic tasks to be completed in the turbine after the main components have been installed
ELEMENT 10.2 - EXAMPLES OF HYDRAULIC COMPLETION
Learning objectives:
87) The participants can describe examples of topics during pre-assembly and installation while performing hydraulic completion (Knowledge, basic level)
88) The participants can describe the importance of following the work instructions (Knowledge, basic level)
89) The participants can describe the importance of cleanliness (Knowledge, basic level)
Global Wind Organisation / www.globalwindsafety.org
213 / 269
Made with FlippingBook Digital Proposal Creator