Technical training
Basic Technical Training Standard / V9 2024-06-24
TOTAL
15 min.
9. Pipes, hoses and connections
9.1
Oil transfer
9.2
Hydraulic connections TOTAL
20 min.
10. Oil and filters
10.1 Handling oil procedures/cleanliness 10.2 Collecting an oil sample 10.3 Check oil level 10.4 Filters TOTAL 11.1 Symbols and diagrams 11.2 Identifying measuring points TOTAL
45 min.
11. Hydraulic diagrams
45 min.
12. Pressure measuring tools
12.1 Pressure gauge/manometer 12.2 Pressure measuring TOTAL
20 min.
13. Summary and theoretical test
13.1 Summary
13.2 Theoretical test TOTAL 14.1 Training review TOTAL
30 min.
14. Training review
15 min.
GRAND TOTAL
555min.
Table 11.5.1 – BTT Hydraulic module timetable
11.6 Detailed description of the BTT Hydraulic Module LESSON 1 - INTRODUCTION
30 min.
The aim of this lesson is to enable the participants on the GWO BTT Hydraulic Module training to engage in the training safely and with motivation, while recognising what is expected of them during the training.
If this module is delivered combined with other BTT modules to the same participants, the redundant introductory elements shall not be repeated.
Note
Global Wind Organisation / www.globalwindsafety.org
88 / 269
Made with FlippingBook Digital Proposal Creator