The transformer The transformer controls the lighting with the help of a light sensor and, if desired, a timer. The transformer can be plugged into any electrical outlet.
THE EASY-LOCK & CC-2 CABLE CONNECTOR The Easy-Lock and CC-2 cable connector can be literally connected with the flick of a wrist. A cable clamp is used to secure the cable in the connector. Tightening the 15 cap presses the contacts into the insulating material on the cable. This creates a firm connection. The special gel in the connector protects the connection against moisture and other external influences. The cable sheath material ensures the cable is not damaged. This means that it is no problem to move the Easy Lock and CC-2 and you can easily adjust your lighting plan at any time.
14
15
2
Fixtures Every fixture has a cable with a mini-connector that connects to the Easy-Lock system. Extension cord If you want to install a light a bit farther away from the main 12 volt cable, just use an extension cord and then connect it to the Easy-Lock.
4
8
in-lite outdoor lighting is based on low voltage (12 volts). Our lighting is therefore safe and easy to install yourself. THE IN-LITE 12 VOLT SYSTEM
The cable The 12-volt cable is rolled out from the transformer and guided along the fixtures. The cable can end anywhere in the yard and need not form a closed system. Seals are installed to finish and protect the end of the cable.
FRONT VIEW EASY-LOCK
FRONT VIEW CABLE CONNECTOR CC-2
The Easy-Lock The Easy-Lock connects the
CC-2 cable connector The cable connectors make it possible to easily create one or more cable branches in order to guide the cable along the various fixtures.
fixture with the 12 volt cable. The connection provides power to the fixture.
Want to learn more about installing in-lite lighting? See page 34 or watch the videos at in-lite.com/installation-tips
TOP VIEW EASY-LOCK
TOP VIEW CABLE CONNECTOR CC-2
Made with FlippingBook Learn more on our blog