IN-LITE - EN - brochure 2018

THE BOOKOF IN-LITE

L E D OUTDOOR L I G H T I N G

2 0 1 8

MAKE YOUR OUTDOOR SPACE UNIQUE The outdoors is perfect for recharging your batteries and enjoying life. Outdoor lighting allows you to enjoy your yard or deck 24/7 during any season. in-lite likes helping you to create a unique outdoor space!

INSPIRATION EXCEPTIONALLY INVITING 28

INSPIRATION EXCEPTIONAL LIVING 16

INSPIRATION EXCEPTIONAL GREENERY 8

IN-LITE LED LIGHTING 22

STEP-BY-STEP OUTDOOR LIGHTING 36

INFORMATION The in-lite 12 volt system

14 34

Installation tips

PRODUCT RANGE Ground lights

40 42 44 46 48

Bollards

Wall lights

THIJS’S TIPS FOR YOUR LIGHTING PLAN 24

Outdoor spotlights Surface spotlights

IN-LITE LAB. 50

WE ARE IN-LITE 26

Warranty

THIS IS WHAT WE GUARANTEE

HIGH-QUALITY DUTCHDESIGN

ENERGY-EFFICIENT &DURABLE Our fixtures are fitted with high-quality LED light sources that are extremely energy-efficient and very long-lasting.

We personally design all of our outdoor lights in order to offer you a high-quality and cutting-edge product range.

SIMPLE & FLEXIBLE

5-YEAR WARRANTY

in-lite lighting operates on low voltage and is easy to install, modify and expand.

Our comprehensive 5-year warranty lets you enjoy your new lighting with complete peace of mind.

INSPIRATION UNIQUE GREENERY

Lots of greenery makes your yard, roof terrace or deck even more attractive and inviting. Plants and trees bring your yard to life and should also be enjoyed after dark. Outdoor lighting gives your landscape the attention it deserves after dark and lets you turn your outdoor living space into an inviting retreat full of moving shadows, special colors and unique contrasts.

01 - EVO GROUND 300 DARK

02 - SCOPE

03 - EVO HYDE 180 DARK

04 - MINI SCOPE DUO

05 - LIV LOW WHITE

01 - BIG NERO

03 - SUB

02 - MINI SCOPE

04 - LIV LOW CORTEN

05 - WEDGE DARK

IMPLEMENTED FIXTURES

EXCEPTIONAL GREENERY

WALL LIGHT WEDGE DARK p. 11

GROUND LIGHT BIG NERO p. 10

GROUND LIGHT HYVE p. 12

GROUND LIGHT EVO GROUND 300 DARK p. 8

OUTDOOR SPOTLIGHT SUB p. 11

SURFACE SPOTLIGHT EVO HYDE 180 DARK p. 8

OUTDOOR SPOTLIGHT MINI SCOPE DUO p. 9/12

01 - SCOPE + RISER 350

02 - MINI SCOPE DUO

03 - MINI SCOPE

04 - HYVE

OUTDOOR SPOTLIGHT SCOPE p. 8/12

BOLLARD LIV LOW CORTEN p. 11

BOLLARD LIV LOW WHITE p. 9

OUTDOOR SPOTLIGHT MINI SCOPE p. 10/12

The transformer The transformer controls the lighting with the help of a light sensor and, if desired, a timer. The transformer can be plugged into any electrical outlet.

THE EASY-LOCK & CC-2 CABLE CONNECTOR The Easy-Lock and CC-2 cable connector can be literally connected with the flick of a wrist. A cable clamp is used to secure the cable in the connector. Tightening the 15 cap presses the contacts into the insulating material on the cable. This creates a firm connection. The special gel in the connector protects the connection against moisture and other external influences. The cable sheath material ensures the cable is not damaged. This means that it is no problem to move the Easy Lock and CC-2 and you can easily adjust your lighting plan at any time.

Fixtures Every fixture has a cable with a mini-connector that connects to the Easy-Lock system. Extension cord If you want to install a light a bit farther away from the main 12 volt cable, just use an extension cord and then connect it to the Easy-Lock.

in-lite outdoor lighting is based on low voltage (12 volts). Our lighting is therefore safe and easy to install yourself. THE IN-LITE 12 VOLT SYSTEM

The cable The 12-volt cable is rolled out from the transformer and guided along the fixtures. The cable can end anywhere in the yard and need not form a closed system. Seals are installed to finish and protect the end of the cable.

FRONT VIEW EASY-LOCK

FRONT VIEW CABLE CONNECTOR CC-2

The Easy-Lock The Easy-Lock connects the

CC-2 cable connector The cable connectors make it possible to easily create one or more cable branches in order to guide the cable along the various fixtures.

fixture with the 12 volt cable. The connection provides power to the fixture.

Want to learn more about installing in-lite lighting? See page 34 or watch the videos at in-lite.com/installation-tips

TOP VIEW EASY-LOCK

TOP VIEW CABLE CONNECTOR CC-2

INSPIRATION UNIQUE LIVING

Your outdoor space is part of your home. That is why illuminating your outer walls and entrance is a great starting point for illuminating your outdoor space. It brings the outside in and enhances the appearance of your property after dark.

01 - BIG SCOPE

02 - ACE UP-DOWN 100-230V

03 - BIG NERO

04 - MINI SCOPE

05 - ACE DARK

06 - HYVE

01 - EVO DARK

02 - EVO GROUND 300 DARK

03 - EVO LOW DARK

04 - ACE UP-DOWN DARK

100-230V

05 - NERO

06 - MINI SCOPE

07 - HYVE 22

IMPLEMENTED FIXTURES

EXCEPTIONAL LIVING

01 - NERO

02 - BIG SCOPE

03 - EVO HYDE 550 DARK

GROUND LIGHT HYVE 22 p. 19

SURFACE SPOTLIGHT EVO HYDE 550 DARK p. 20

04 - MINI SCOPE DUO

GROUND LIGHT HYVE p. 17

GROUND LIGHT BIG NERO p. 17

GROUND LIGHT NERO p. 19/20

GROUND LIGHT EVO GROUND 300 DARK p. 18/19

WALL LIGHT ACE UP-DOWN (DARK) 100-230V p. 16/19

BOLLARD EVO LOW DARK p. 19

OUTDOOR SPOTLIGHT MINI SCOPE DUO p. 20

OUTDOOR SPOTLIGHT BIG SCOPE p. 17/20

BOLLARD ACE DARK p. 17

BOLLARD EVO DARK p. 18

OUTDOOR SPOTLIGHT MINI SCOPE p. 17/19

LED OUTDOOR LIGHTING GO FOR

The CRI (Color Rendering Index) is used to indicate how much color is perceived by the human eye. During the day, we see all colors in the yard effectively. Daylight also has the highest CRI out of 100. LED’s can have a CRI of between 70 and 95, whereby 95 indicates very natural color display.

CRI >90 LED BY IN-LITE

CRI <70

CRI 80

in-lite has been designing outdoor lighting with LED sources for over 10 years. LED lamps have since become standard in almost all types of lighting: they are energy-efficient and last a long time. In addition, they also immediately provide full and clear light. When you opt for in-lite, you are guaranteed the best LED’s with the clearest light and minimum energy consumption. A look behind the scenes. Better for the environment in-lite outdoor lights are fitted with LED’s by the leading manufacturers in the sector. Companies that are continuously attempting to improve their products. One of the areas where great progress is being made is the output of LED’s: less and less energy is now needed to generate the same amount of light from LED’s. LED’s with very high output have been incorporated into our fixtures, which means energy consumption can be minimized. This is better for the environment and better for your energy bill. AN EFFECTIVE COLOR EXPERIENCE

Guaranteed enjoyment Besides the light source, the construction of the fixture also has an impact on the quality and life-span of your lighting. in-lite designs its own fixtures, which means all these factors are given the attention they deserve. That is why we can confidently offer a 5 year warranty. You are thus guaranteed long-lasting enjoyment from in-lite’s outdoor lighting!

Lively colors We believe it is important for you to also enjoy the colors in your yard once your outdoor lighting is switched on in the evening. High quality LED light sources have a CRI of at least 90 and make sure you continue seeing all colors and contrasts even when the sun goes down. All fixtures in our range have a CRI of between 90 and 95, which means they are ideal for decorative yard lighting. Green trees or bushes thus remain nice and green instead of dull and gray. Decorative light Besides the light’s CRI, light color also determines what your yard will look like in the evening. Light color, or light temperature, is expressed in Kelvin. The higher the color temperature, the bleaker the light. The fixtures in our range generate warm, decorative white light between 2700 Kelvin and 3000 Kelvin. We always make sure light color matches the purpose of your light fixture and that it remains constant for the life-span of the fixture.

Did you know that LED’s consume around 80% less energy than halogen light sources? Curious about how much energy an in-lite light uses? View the energy label on the packaging or the product details on the website.

TIPS FROM THIJS FOR YOUR LIGHTING PLAN

tip CONSIDER THE SHADOW Does your home or yard have a wall or ceiling located in close proximity to plants or trees? Then consider how you can make the most of the shadow effects. A single outdoor light is often enough to create fantastic results.

tip IS YOUR LIGHTING PLAN COMPLETE? So always make an accompanying cable plan.

Are you designing your first illuminat- ed yard, and could you use a bit of help? Thijs is the lighting specialist at the in- lite lab and will be pleased to assist you with a few useful tips you can use every day when realizing lighting designs. Before creating a lighting plan, take a look at the yard from various perspectives. What are the main lines of vision (for example, from inside the house or from the deck), what do you see and which elements deserve to be highlighted? Place fixtures so the light creates a pleasant effect when you look at the yard from a variety of angles. You should not only work with large spotlights. A much better effect is created when different types of light are mixed. Always check if the light source is compatible with the element you want to highlight. You may sometimes require large lights (e.g. for a large tree), whereas softer lights may be better suited on other occasions (e.g. on a deck). The in-lite product overview clearly shows which fixtures are suitable for specific yard elements.

You should never stare directly into the light source and blind yourself. So always make sure spotlights point away from a seating area or path or use accessories like SHIELD and KILL FLASH to avoid exposure.

You are free to choose the type of lighting you place between your plants. Some people prefer visible fixtures like the LIV and LIV LOW bollards, while other people prefer less eye-catching fixtures like the MINI SCOPE and the MINI SCOPE DUO. Of course, both choices are fine. But make sure the height and light distribution are suitable for your plants. For example, use the LIV or MINI SCOPE DUO between high plants, and the LIV LOW or MINI SCOPE between low plants. You can create a good look by dividing your lighting plan into different zones. This makes it possible to separately switch on lighting used for the various components, such as the driveway, deck and borders. Use a transformer for each zone and configure each zone individually. For example, functional & safe lighting can be left activated

the whole night; decorative lighting between plants can be switched off around bedtime and lighting on your deck can only be switched on for special occasions. This allows you to adopt a conscious approach to your lighting and energy.

Time to get started! Once your lighting plan has been

completed, you can start thinking about installation. The in-lite 12 volt system is easy to install yourself. But always create a cable plan before you get started so you do not encounter any surprises.

in-lite.com/cable-plan

MORE THAN A BRAND

in-lite is more than an outdoor lighting brand. We are a company with a mission. Each and every

day, a team of around twenty-five enthusiastic professionals does its utmost to enhance everything

outdoors. We achieve this by developing quality outdoor lights, but above all by inspiring consumers

as much as possible and showing them that lighting fits perfectly in any outdoor space.

But we do not accomplish this alone. An extensive network of select partners and landscapers has the

exact same mission. We train these professionals in our show yard and inspire themwith unique and

exceptional lighting applications. Together, we make any outdoor area a unique space for enjoying

the evening hours.

HOW DO YOU MAKE YOUR OUTDOOR SPACE EXCEPTIONAL? You, too, can contribute to our mission to make the outdoors exceptional. Follow us on social media and share your exceptional outdoor moments with us. A yard dinner with your family; an outdoor drink with neighbors or a winter barbecue with your friends - all great ways for using your special outdoor space!

Outdoors is the perfect place for relaxing and enjoying good company and good food. Outdoor spaces with a pleasant deck, inviting lounge corner or attractive overhang are designed for enjoyment. They make your backyard a pleasant place to spend time and, with the right lighting, you can enjoy this space all year long. INSPIRATION EXCEPTIONALLY INVITING

01 - ACE UP-DOWN CORTEN + SHUTTER 1

02 - SCOPE

03 - ACE DOWN CORTEN

01 - FLUX

02 - MINI SCOPE

03 - WEDGE

04 - ACE DOWN + LENS CLEAR

05 - BLINK WHITE

06 - EVO HYDE 550 DARK

IMPLEMENTED FIXTURES

EXCEPTIONALLY INVITING

SURFACE SPOTLIGHT EVO HYDE 550 DARK p. 31

GROUND LIGHT FUSION 22 RVS p. 32

GROUND LIGHT FLUX p. 30

WALL LIGHT WEDGE p. 30

GROUND LIGHT FUSION p. 32

WALL LIGHT BLINK WHITE p. 31

WALL LIGHT EVO DOWN DARK p. 32

OUTDOOR SPOTLIGHT SCOPE p. 29

WALL LIGHT ACE DOWN CORTEN p. 29

01 - EVO DOWN DARK

02 - FUSION

03 - FUSION 22 RVS

WALL LIGHT ACE DOWN p. 31

WALL LIGHT ACE UP-DOWN CORTEN p. 29

OUTDOOR SPOTLIGHT MINI SCOPE p. 30/31

If you want to install your in-lite lighting personally, we have put together a few important tips for you. Our website also contains several helpful instruction films to assist you during installation. INSTALLATION TIPS

Step 3: The Easy-Lock The Easy-Lock is used to connect the fixture to the cable. The duct is clamped onto the cable, inserted into the Easy-Lock and secured with the cap. It is impor- tant that the Easy-Lock is attached properly because it ensures good electrical conduction and optimal illumination of your light. The special gel provides the connection with extra protection against moisture and other external factors. Tip: If you want to move a light fixture, this is no problem. The Easy-Lock can be easily disconnected and connected at another place on the cable. The cable will then repair automatically. Step 4: The mini-connector You then attach the mini-connector to connect the fixture using the Easy-Lock. The soft PVC casing protects the connection frommoisture and dirt. The mini-connector also lets you easily pull the fixture cable through a hole in a tile or wall.

Step 1: The transformer The transformer should preferably be mounted in a garage or shed. Naturally, you can also mount it outside on, for example, a pole or wall. When doing so, make sure there is always a distance of around 50 cm between the ground and the bottom of the transform- er. This will keep the transformer safe from splashing water. The light sensor should be installed outside, since this causes lighting to switch on at dusk. Do not mount the light sensor close to other lighting, because it will react to it, and never remove the silicone cap because this offers protection against moisture. The cable lugs provided are used to connect the cable to the transformer. These ensure good electrical conduction and protect the transformer from damage. Tip: Want to save energy? Do not leave the lighting switched on all night long (‘dusk to dawn’ setting), but set the number of hours that the lighting is on after sunset (‘on hours’ setting).

Step 2: The cable Once you have connected the cable to the transformer, you can roll it out. Install it along paving and borders as much as possible for easy access. Use extension cords for fixtures installed further away from the main cable. You can also create cable branches to guide the cable more effectively along the fixtures. This can be done using a cable connector. The cable can end any- where in the yard and only needs to be secured with the cap provided. A layer of soil on top of the cable is enough to conceal it. Tip: Make a cable plan beforehand and include the location of the cable, fixtures, extension cores and cable connectors. More information on how to cre- ate a good cable plan can be found on our website.

Tip: To install a fixture further away from the cable, use an extension cord between the mini-connector on the Easy-Lock system and the fixture. Step 5: The fixture Finally, install the fixture at the desired location. Al- ways follow the instructions in the manual, which can be found on our website. If you want to install ground lights in your deck, keep in mind that you will proba- bly have to drill holes in the tiles or boards. It is important to do this correctly because a hole that is not drilled perfectly round can cause installation problems. A dealer or landscaper can take care of this for you since they have the right tools.

All tips and videos can be found at in-lite.com/installation-tips

STEP BY STEP OUTDOOR LIGHTING IN THE YARD

The next feature to be illuminated was her favorite part of the yard, the dining area. For this, she installed ACE wall lights on the fence. “This fixture produces a wonderful beam of light that does not shine directly into your eyes and I really like the cool dark design,” says Anne. To accentuate the serviceberry tree and the hydrange- as, she used NERO ground lights and MINI SCOPE out- door spotlight. Anne says, “The lighting really brings out the character of the plants.” And, last but not least, as the crowning final touch, Anne placed a number of bollards in the ornamental grass. Anne says, “The ambiance that the outdoor lighting creates lets us enjoy the appearance of our yard even longer each day and, not only that, but also be able to see each other, which I personally enjoy.”

Our system offers ultimate flexibility. Want to start with a few lights and add more later? No problem. Have you seen the new collection and want to update the lighting in your yard? Our system allows you to easily adjust, as well as expand, the lighting in your yard. Blogger Anne from ‘Remade with love’ had already determined which yard elements she wanted to illumi- nate. She then added lighting fixtures in her backyard one by one. She started with a few outdoor spotlights and a wall light to highlight the ornamental apple trees and shed.

Blogger Anne from ‘Remade with love’.

STEP 1 TRANSFORMER CB-056/M | CABLE CBL-40 14/2 | 01 - 2 X SCOPE | 02 1 X ACE UP-DOWN DARK 100-230V

RANGE GROUND LIGHTS

Ground lights can be buried into pavements, wood or gravel, for instance. They disappear into the landscape during the day, while producing a unique light effect after dark. We offer a complete range of fixtures that open the door to an endless number of possibilities. A few examples.

FUSION 22

HYVE + BOX 100

FLUX

EVO GROUND 300 DARK

LIGHT THAT DOES NOT BLIND

DECORATIVE LINES

Our LED ground lights FUSION and HYVE are fitted with special lenses to yield a diffuse light that does not produce glare. The soft glow of FUSION makes it perfect for use on decks and in other outdoor elements. If you are interested in a slightly higher light output for a driveway, for example, HYVE is the right solution. Both fixtures

are available in different models: regular 60 mmmodel with stainless steel ring and a smaller 22 mm version with or without a stainless steel ring. If you want a streamlined look, the 60 mm version comes with a rectangular stainless steel cover plate and a special square box (BOX 100). BOX 100 is also easy to place between paving or loose surfaces.

The EVO premium-quality product assortment is a new addition to our range. The EVO GROUND 300 DARK allows you to quickly create decorative lighting effects on paths or driveways. This fixture is 30 cm long and thus ideal for incorporating into various sizes of tiles. You can also incorporate this ground light into loose surfaces like gravel or grass.

More info about EVO can be found at in-lite.com/evo

RANGE BOLLARDS

LIV LOW

ACE WHITE

The bollards in our range can be used to create ambiance on a deck, along a path or driveway or in a border. A bollard can be easily inserted into the soil or mounted onto a hard surface.

SHAPES & COLORS

During the daytime, the bollards serve a decorative function in the yard. Design and color are therefore important factors to consider when choosing a bollard. The in-lite product range includes outdoor lighting in a wide range of colors and

models. Our lights in warm silver and dark gray fit in perfectly with almost any landscape design. Is your taste a bit more edgy? We also offer sleek white fixtures and lights with a luxurious corten steel finish.

ATTRACTIVE BORDER

Borders can be attractively illuminated with fixtures that produce a pleasant diffuse light. The bollards from our LIV series are perfect for this. LIV LOW is designed for borders with low edging and LIV for those with higher plants. A combination of high and low fixtures is always an option!

HIGHLIGHTED: EVO & EVO LOW EVO DARK and EVO LOW DARK are characterized by a streamlined rectangular design and a long light source. The diamond cut lens helps to equally spread light generated by the EVO DARK and the EVO LOW DARK. The lights are made from high quality anodized aluminum, which means they are highly resistant against corrosion and have an architectonic appearance. Real eye-catchers along a path or driveway!

PATHS OR DRIVEWAYS

SENTINA

Want to illuminate a pathway or driveway with bollards? Then opt for fixtures that generate dispersed light, like the ACE, EVO DARK or SENTINA. They create clear lighting effects and shadows on the surface. This not only produces an attractive effect, but is also functional since they illuminate your path or driveway. ACE lights also come with an adjustable light source, making this fixture highly versatile for use in numerous situations.

LIV CORTEN

tip! Naturally, wall lights can also be used next to your front door. The ACE UP- DOWN 100-230V is ideal for connecting to a standard 230V power socket.

RANGE WALL LIGHTS

EVO DOWN DARK

ARCHITECTONIC APPEARANCE

EVO DOWN is a wall light in the new EVO family. Just like the upright version, this streamlined fixture has a high quality anodized casing. This gives it the architectonic appearance that looks so good against a plastered wall or wooden fence. The fixture is easy to install; first screw the wall plate at the desired height, and then slide the fixture on to the plate.

Our range of products includes a wide selection of wall lights. These can be used in a variety of ways, such as alongside French doors or repeatedly along a fence. A number of our wall lights can also be connected* to the power network (230V) for use next to, for example, the front door.

BIG & SLIM

The BIG CUBID DARK and WEDGE SLIM DARK are new additions to our range of wall lights. BIG CUBID DARK is the big brother of the CUBID DARK. This square fixture has a light distribution of around 3m and offers attractive direct light. Thus perfect for fences or walls. The WEDGE SLIM DARK is a long, subtle wall fixture with broad light output. This means the fixture is ideal for installation at the bottom of fences or walls.

BLINK

WEDGE WHITE

WALLS AND FENCES

Wall lights can be placed at various places in the yard. For example, the WEDGE, BLINK, ACE DOWN or ACE UP-DOWN can be placed on fences or walls. These fixtures are most effective when placed at a height between 1.60m and 1.80m. If you want a lower light fixture, then you should opt for the CUBID.

BIG CUBID DARK

WEDGE SLIM DARK

The LED outdoor spotlights in our product range are perfect for illuminating unique elements in the yard, such as statues, trees or bushes. You can easily insert our spotlights into the soil using the ground pin or use a ground plate to mount them onto a hard surface. For illuminating water elements, we have added a special underwater spotlight to the range. RANGE OUTDOOR SPOTLIGHTS

SHIELD

KILLFLASH

SCOPE BASE PLATE

RISER 350

SCOPE ACCESSORIES

All SCOPE spotlights are easy to adjust and to install in the ground using the included ground stake. The SCOPE BASE PLATE can be used to install the SCOPE or BIG SCOPE on a harder surface. And the RISER 350 can be used to raise your light, so its rays are not blocked by high plants located in front of the intended object.

Want to use your MINI SCOPE or MINI SCOPE DUO in, for example, a border next to the deck, or prefer not to look into the light source? Then you need the SHIELD accessory, which allows you to shield off the light on one side. Thinking of installing the MINI SCOPE in, for example, a canopy? The new KILL FLASH accessory prevents blinding and also gives your fixture an extra chic appearance.

MINI SCOPE DUO

MINI SCOPE

SCOPE

BIG SCOPE

BIG SCOPE NARROW

MORE AND BETTER LIGHT

UNDERWATER

12m

All products in the SCOPE series have been renewed this season. Lights feature the latest LED’s, which means they generate more light with less power. The light angles have also been modified to better suit elements in your yard. The update also improves the color display of our outdoor spotlights. This means our lights show colors in the yard as naturally and realistically as possible. So no grayish green or blue leaves, but nice, true green colors and perfect contrasts. Thus the perfect color experience.

You can use our special underwater spotlights to illuminate ponds, fountains and other water elements. SUB produces a diffuse light that creates an enchanting effect. This spotlight has a weighted base plate and can also be used above water!

36º

28º

38º

15º

SUB

CHIC APPEARANCE From now on, all products in the SCOPE series will be completely black. This gives the fixtures a more chic look and makes them inconspicuous between the plants.

RANGE SURFACE SPOTLIGHTS

HIGHLIGHTED: KILLFLASH

EVO HYDE 180 DARK

HIDDEN LIGHT

The MINI SCOPE CEILING comes with a standard KILL FLASH. This is a raised ring with a honey cone structure, which reduces blinding and gives the fixture a chic look.

If you want to create indirect lighting effects in your yard, then the EVO HYDE 180 DARK and EVO HYDE 550 DARK are ideal. These LED strips are 18cm and 55cm long and can be installed under almost every surface, from pond edges to stairs and cover plates. These LED strips pave the way for many new lighting effects with in-lite lighting. Installation is easy: screw two screws into the surface and click the strips on to the accompanying installation caps.

Surface spotlights are newadditions to the in-lite range. These products are ideal for installation on horizontal surfaces like ceilings, beams, stairs and pond edges. They offer newpossibilities when creating direct and indirect lighting effects.

ON THE CEILING

The MINI SCOPE CEILING is a surface spotlight and is ideal for installation on, for example, canopies and pergolas. The MINI SCOPE CEILING is very easy to install. Use the two screws to attach the installation plate to the surface and simple twist the light source on to the plate.

5 YEAR IN-LITE WARRANTY

INNOVATION DISTINGUISHES BETWEEN A LEADER AND A FOLLOWER

in-lite pays great attention to the technical design of all its fixtures. That is why we can offer a five-year warranty on our fixtures and transformers.

Should something go wrong, you can contact the landscape architect or dealer where you bought the product, and make use of the warranty. Your receipt or invoice will be your proof of purchase, so keep it in a safe place! If it is not possible to repair the product, you will always be given a replacement within the warranty period. If the required model is no longer

available, then we will offer you an appropriate alternative.

Dare to be different The in-lite lab. is always on the lookout for unique outdoor spaces and projects to illuminate in a creative way. Unusual rooftop gardens, decks and hotel gardens all fall in the category of outdoor spaces where the in-lite lab is eager to sink its teeth into. These spaces are larger than average and with different needs. This means that they require a different approach to illumination. At the in-lite lab, we dare to be different and always seek out the right solution for every situation.

Contact Do you own a unique outdoor space, such as a hotel (rooftop) garden or restaurant deck, and would like a creative lighting solution based on a personal approach, one that includes fixtures tailored to your specific preferences? If so, do not hesitate to contact the in-lite lab.

To keep your outdoor lights in good condition, you should, in the same way as the rest of your garden, perform regular maintenance. For simple maintenance tips, please visit in-lite.com/maintenance .

We advise you not to combine in-lite lighting with cables or transformers by other manufacturers; this will cause your warranty to be null and void.

IN-LITELAB.COM

INSTAGRAM.COM/INLITELAB

THE IN-LITE WARRANTY ALLOWS YOU TO ENJOY YOUR OUTDOOR LIGHTING WITH COMPLETE PEACE OF MIND!

ENHANCE YOUR OUTDOOR SPACE

IN-LITE.COM

Page 1 Page 2-3 Page 4-5 Page 6-7 Page 8-9 Page 10-11 Page 12-13 Page 14-15 Page 16-17 Page 18-19 Page 20-21 Page 22-23 Page 24-25 Page 26-27 Page 28-29 Page 30-31 Page 32-33 Page 34-35 Page 36-37 Page 38-39 Page 40-41 Page 42-43 Page 44-45 Page 46-47 Page 48-49 Page 50-51 Page 52

Made with FlippingBook Learn more on our blog