CONTURO Edge Bander booklet

3.3 Mobile gluing of edges

The CONTURO is now ready to start fixing the edging to the work- piece. The most important thing is that the workpiece is clamped securely. You can work on the Festool multifunction table MFT/3 either with screw or lever clamps, or use the Festool VAC SYS vacuum clamping system or a combination of both. The VAC SYS system was used in our example because the workpiece is accessible from all sides – ideal for fixing edging to round workpieces.

VAC SYS

Refer to the chapter “Tips and tricks” for further information on working with the VAC SYS and MFT/3 as well as a plan of a workstation.  Page 66

MFT

26

Made with FlippingBook - Online catalogs