To glue onto straight edges, place the CONTURO in a horizontal position and guide the workpiece past it. This working method is very practical for small or narrow workpieces that are difficult to clamp. Stationary gluing of straight edges
1
2
Set edging height with some play so that the edging slides smoothly through the machine.
Then press the start button and guide the machine towards the edge.
3
4
Ensure the correct speed is selected before you begin the gluing process, as both of your hands will be placed on the workpiece.
Position the workpiece at a distance of 2 cm (13/16”) from the contact roller and press the start button again.
42
Made with FlippingBook - Online catalogs