Tempered Beef Trim Blocks. Separated Quickly. Break tempered and semi-frozen beef trim blocks into original pieces! Our innovative and unique Tempered Block Breaker is designed to take tempered and semi-frozen beef trim blocks and separate them back into their natural pieces to avoid USDA relabeling regulations. This allows for spraying of citric acid (or other agents) onto each side of product muscle to reduce or eliminate bacteria growth. Solid 4” solid shafts with 7” blades are strong enough to handle meat trim blocks semi-frozen at 19®, but operates ideally when blocks are tempered to 26°. Gentle processing captures 99% of product purge, retaining product weight and saving you money. Safety is key in the meat processing industry. The Tempered Block Breaker boasts a safety switch and actuator on the auger discharge trough that prevents the machine from running if guarding is not in place. Safety guarding runs the length of the top of the machine, preventing operators from falling into the breaker. 8 7 A-08444 BLOCK GRINDER TOTAL ASSEMBLY
Tempered Block Breaker Features: • Stainless Steel 304 Construction • Solid 4” Shaft Auger & Breaker Bars • Hopper Constructed from 3/8” Side Plates and 5/8” End Plates
•
Dual 160 Corrosion Resistant Roller Chains
• •
30 HP Baldor Motor
Low Output RPM Sumitomo Gearbox
•
Solid Poly Lube Filled Bearings for a Maintenance Free Application Touch Screen Control Panel Motor Amp Overload Protection
• • • • •
CIP Mode
Safety Interlinks
4
3
6
5
Combo Sensor and Lid Safety Switch Auger Output Door Closes Au- tomatically When No Product is Present 9 9
F
•
11
Separate tempered trim blocks, save purge, reduce expenses, and treat product to eliminate bacteria with the Tempered Block Breaker!
13
3
8
5
E
6
4
4
7
6
5
8
9
A-08444 BLOCK GRINDER TOTAL ASSEMBLY 52.50 20.00 23.71 50.75
DETAIL2 SCALE1 : 2
12
14
10
DETAIL 1 SCALE1 : 2
SEE PICTURES & VIDEO AT FTIINC.ORG/BLOCKBREAKER
TECHNICAL SPECIFICATIONS F
11.00
D
106.97 O.A.L.
41.04
53.12
9
FEATURE
SPECIFICATION
9
39.75
10.63
Machine Dimensions Height
REF
126.75”
CMI007
CMI007
.75 TYP.
Width
53.12”
C
Length
106.97”
E
6
4
CMI007
Motor
BP 0.7 SP_ 0.375_1 SP_ 0.250_1 CS- 10x2. CS- 6x4. FW_
126.75 O.A.H
9
50.75
Drive Shaft
30 HP
52.50
12
3.90
23.71
86.00
14
20.00
10
DETAIL 1 SCALE 1 : 2
B
40.10
55.38
FW_
11.00
LW_
C
D
106.97 O.A.L.
T confi infor Integr used, inwho th per
41.04
53.12
CABINET SIDE REMOVED TO SHOW IN-LINE SPROCKETS
A
NOTES:
39.75
T OT
10.63
.X .XX .XXX
UNLESSOTHERWISE SPECIFIEDDEBUR AND BREAK ALL SHARP CORNERS. 1. UNLESSOTHERWISE SPECIFIED ETCH ALLUP BENDS. 2.
Made with FlippingBook Online newsletter