If you want to install your in-lite lighting personally, we have put together a few important tips for you. Our website also contains several helpful instruction videos to assist you during installation. INSTALLATION
36
Step 1 The transformer The first step is to install the transformer around 50 cm above the ground in a fence or post in your yard. The light sensor is installed on the outside, since this causes the lighting to switch on at dusk. Make sure that the light sensor is not placed closed to artificial lighting because the sensor will react to it. The cable lugs provided are used to connect the cable to the transformer. These ensure good electrical conduction and protect the transformer from damage. Tip: Want to save energy? Do not leave the lighting switched on all night long (‘dusk to dawn’ setting), but set the number of hours that the lighting is on after sunset (‘on hours’ setting).
Step 2 The cable Once you have connected the cable to the transformer, you can roll it out. Install it along paving and borders as much as possible for easy access. Use extension cords for fixtures installed further away from the main cable. You can also make cable branches to guide the cable more ef- fectively along the fixtures. This is done using a cable connector. The cable can end anywhere in the yard and only needs to be secured with the cap provided. A layer of soil on top of the cable is enough to conceal it. Tip: Make a cable plan beforehand and include the location of the cable, fixtures, extension cords and cable connectors in it. More information on how to create a good cable plan can be found on our website.
Made with FlippingBook - Online Brochure Maker