37
Step 3 The Easy-Lock The Easy-Lock is used to connect the fixture to the cable. The duct is clamped onto the cable, inserted into the Easy-Lock and secured with the cap. It is impor- tant that the Easy-Lock is attached properly because it ensures good electrical conduction and optimal illumination of your light. The special gel provides the connection with extra protection against moisture and other external factors. Tip: If you decide to move the light to another location, the Easy-Lock can be easily detached and connected to a dif- ferent section of the cable – without damaging the cable! Step 4 The mini-connector You then attach the mini-connector to connect the fix- ture using the Easy-Lock. The soft PVC casing protects the connection frommoisture and dirt. The mini- connector also lets you easily pull the fixture cable through a hole in a tile or wall.
Tip: To install a fixture further away from the cable, use an extension cord between the mini-connector on the Easy-Lock and the fixture. Step 5 The fixture Finally, install the fixture at the desired location. Always follow the instructions in the manual, which can be found on our website. If you want to install ground lights in your deck, keep in mind that you will probably have to drill holes in the tiles or boards. It is important that this be done properly because a hole that is not drilled perfectly round can cause installa- tion problems. A dealer or landscaper can take care of this for you, as they have the right tools. If you would prefer to do it yourself, visit our Learning Center in-lite.com/learning and watch our drilling videos.
All tips and videos can be found at in-lite.com/learning
Made with FlippingBook - Online Brochure Maker