TRAINING: MONTHLY FIRE EXTINGUISHER INSPECTION PROCESS
ACCESS Ensure extinguishers are in their proper location and visible. Extinguishers should be easily accessible and not blocked or obstructed in any way. PIN AND GAUGE Check to see that the pin and safety seal are fully intact and in place. Check the pressure gauge to ensure that the arrow is in the ‘green zone’ and operable. PHYSICAL CONDITION Confirm that there is no visible physical damage to the body, hose, or nozzle including but not limited to dents, cracks, corrosion, leakage, etc. Check to see that the nozzle is attached and clear of any obstructions. Confirm that the extinguisher is full by lifting it. If it has powder, give it a shake to prevent powder from settling. Mount extinguisher back on wall hanger and secure. INSPECTION TAG There are two sides to every inspection tag: one with the monthly inspection information that should be completed monthly by the employee, and one with the annual inspection information that should be completed within the last 12 months by a licensed contractor. Make sure the annual inspection has been completed within the past 12 months. When all steps (Access, Pin & Gauge, Physical Condition) have been completed, employee should sign their initials and date the tag for the monthly inspection.
HOSE SAFETY SEAL
PIN
PRESSURE GAUGE
INSPECTION TAG
NOZZLE
BODY
VIDEO: MONTHLY EXTINGUISHER INSPECTION
The listed actions above fall under the ‘indemnity terms and conditions’ within the consummated contract between APi National Service Group and the customer. The referenced actions are suggestive mitigation techniques and do not insure the customer from property loss or damages. APi National Service Group | 1100 Old Highway 8 NW | New Brighton, MN 55112 | 888.274.8595 | www.api-nsg.com
Made with FlippingBook flipbook maker