GWO Lift Commission, Inspection, Installation and Maintenance Training Standard V0
2021-09-30_TS_LCIIM_V0
WIRE ROPE REDIRECTION INSIDE THE CABIN
12 min.
The aim of this lesson is to enable the participants to inspect and ensure that the redirection pulleys are in accordance with the relevant manuals and inspection lists. After successfully having completed lesson 14 of the Lift Commission, Inspection, Installation and Maintenance Module: The participants can explain how to inspect redirection pulleys (Knowledge, intermediate level). The participants can perform an installation of the wire into the redirection pulleys (Skills, intermediate level).
The instructor shall:
Present examples of wiring (El) to drive units.
Demonstrate how to install a wire into the redirecting pulleys.
Facilitate practical training on how to install a wire into the redirecting pulleys and provide feedback on participants performance.
Lead or facilitate discussion on how to inspect redirecting pulleys.
The participants shall:
Engage in the practical training and following discussions, share experiences on redirecting pulleys, and reflect on the received feedback.
Lesson 15 - FALL ARREST DEVICE (FAD)
62 min.
The aim of this lesson is to enable the participants to install, inspect and test the function of the fall arrest device (FAD) in accordance with the relevant manuals and inspection lists. After successfully having completed lesson 15 of the Lift Commission, Inspection, Installation and Maintenance Module:
The participants can take responsibility for installing and function testing the fall arrest device (FAD) as described in the relevant manuals (Ability, intermediate level).
Learning objectives:
The participants can explain how to do a visual inspection of labels and type plates (Knowledge, intermediate level).
The participants can explain how to apply labels (Knowledge, intermediate level).
Global Wind Organisation www.globalwindsafety.org
56 / 71
Made with FlippingBook Ebook Creator