GWO Lift Commission, Inspection, Installation and Maintenance Training Standard V0
2021-09-30_TS_LCIIM_V0
Engage in the practical training, reflect on the received feedback, and take active part in discussions and share experiences working with fall arrest devices.
Lesson 16 - SUPPLY CABLE
20 min.
The aim of this lesson is to enable the participants to install and inspect the supply cable and cable bin in accordance with the relevant manuals and inspection lists. After successfully having completed lesson 16 of the Lift Commission, Inspection, Installation and Maintenance Module:
The participants can perform an installation and inspection of a supply cable and cable bin as described in the relevant manuals (Skills, intermediate level).
Learning objectives:
The participants can explain how to do a visual inspection of the feed-in of a supply cable (Knowledge, intermediate level). The participants can perform a re-installation of the feed-in of a supply cable following relevant instructions and manual (Skills, intermediate level).
The instructor shall:
Demonstrate how to inspect and re-install feed-in of a supply cable.
Facilitate practical training on re-installing feed-in of a supply cable, and provide feedback to the participants on their performance. Lead or facilitate discussion on safety issues in relation to inspecting and re-installing feed- in of a supply cable.
The participants shall:
Engage in the practical training, reflect on the received feedback and take active part in discussions and share experiences from working with feed-in of a supply cables.
Learning objectives:
The participants can explain how to do a function test on a strain relief in or outside the cabin (Knowledge, intermediate level). The participants can perform an adjustment and replacement of a strain relief at the cabin according to the relevant manual (Skills, intermediate level).
The instructor shall:
Global Wind Organisation www.globalwindsafety.org
58 / 71
Made with FlippingBook Ebook Creator