Electronic floor temperature controller with remote sensor (for floor heating/wall and ceiling heating) FETR Flush-mounted installation – Design Berlin UP
Type/image
Item no.
Features
Circuit diagram
PG
FETR 101.715#21
UN030109 like FETR 101.715#00, but with scope of delivery:
I
controller, remote sensor 4 m, alre frame “Berlin” (neutral), cover 50 x 50 mm, pure white (like RAL 9010), glossy
FETR 101.716#00
UA030502 like FETR 101.715#00, but with control range 10…42 °C (multi-digit display 1 … 4)
I
Cover sets are offered in various designs (see the sepa- rate overview, “alre flush-mounted range (cover sets)”) and are not included in the delivery. Suitable set no: JZ-009.xxx, e.g.: cover set 50 x 50 mm, pure white, glossy: JZ-009.000 cover set 55 x 55 mm, pure white, glossy: JZ-009.100 Complete device with alre frame “Berlin” (neutral), cover 50 x 50 mm (pure white, like RAL 9010, glossy) on request.
Accessories
Item no.
Features
PG
HF-8 / 4-K2
General features: Spare sensor for FETR 101.7xx Ambient temperature: −5 … +70 °C Protection rating: IP 65 Sensor: NTC Connecting cable: 4 m, PVC General features: Spare sensor for FETR 101.7xx Ambient temperature: −5 … +70 °C Protection rating: IP 65 Sensor: NTC Connecting cable: 6 m, PVC
G8000370
II
HF-8 / 6-K2
G8000368
II
WP-01
General features: Heat conduction paste 2 ml; R > 1 T Ω /cm, silicone-free Ambient temperature: −40 … +150 °C
G9990180
II
THF
General features: protective sleeve for screed mounting (for sleeve sensor HF Ø 7.7, for example, HF-8/4-K2 or HF-8/6-K2), copper
C1809515
II
Catalogue 2022 Page 103
Made with FlippingBook Digital Publishing Software