A robust, anti-rotation device for Vektek Rotating Unions keeping your hydraulics securely attached to the fixture! ROTARY UNION ARM NEW
Make integrating live hydraulics into your horizontal pallet machines easy. Designed to securely attach Vektek Rotary Unions. Can be adapted for other general industrial grade models. Use on single or twin pallet machines where pallet travels parallel to spindle axis. Telescoping members allow flexibility to adapt to your machine for easy installation. Two hose clamp mounting rails included. All clamps and additional rails can be ordered per your requirements (see below). Rotary union interface eliminates premature rotary union failure by preventing the weight of the arm from applying damaging side loads to the rotary union. Rotary Union Arm is designed to attach all Vektek Rotary Unions and allows X, Y and Z movement without inducing damaging twists to the union. Easily customize interface plate to attach most rotary unions.
Each joint contains tapered roller bearings for excellent load holding with smooth actuation. Standard Z-axis travel up to 48 inches, fits most 400 and 500mm pallet machines and some 630s. Longer reaches for 630-800mm pallets are available. Optional hose clamps available (Order your hose clamps below).
Hose clamp rails Hose clamp rails
Hose clamp rails
Visit our website to view Rotary Union Arm Video www.vektek.com
ILS644000 REV A ILS644000 REV A
ILS644000 REV A Model No . Z-Axis Trave l 64-4050-00 Up to 48 Inches
Includes
Arm and hose clamp rail
11.00 STANDARD 11.00 STANDARD
48.00 MAX 48.00 MAX
DIMENSIONS FOR YOUR MOUNTING CHOICE DIMENSIONS FOR YOUR MOUNTING CHOICE (BOTH INCLUDED) DIMENSIONS FOR YOUR MOUNTING CHOICE
11.00 STANDARD
48.00 MAX
Extension Bracket Extension Bracket Mounting Dimensions
Base Bracket Base racket Mounting Dimensions
Base Bracket Mounting Dimensions
Extension Bracket Mounting Dimensions
28.66 MAX 18.66 MIN 28.66 MAX 18.66 MIN
28.66 MAX 18.66 MIN
26.71 MAX 21.71 MIN 26.71 MAX 21.71 MIN
26.71 MAX 21.71 MIN
12.25 10.50
3.00
12.25 10.50
12.25 10.50
3.00
3.00
3.00
4.10
4.25
3.00
Allows for fixture height adjustment and vertical movement during pallet changes
3.00
4.10
4.25
3.00
Allowable Vertical Movement Allowable Vertical Movement Allowable Vertical Movement
3.00
4.10
4.25
3.00
For 1/2 Inch Bolt TYP For 1/2 Inch Bolt TYP
4.10
4.10
The Rotary Union Arm is designed to allow for vertical movement of the rotary union/tombstone while machining and during pallet change. Additional configurations are possible see IS3206. The Rotary Union Arm is easily adjustable approximately 8” during installation and allows for nearly 4” travel during pallet changes. Ask your sales representative for an installation manual for exact details.
The Rotary Union Arm is designed to allow for vertical movement of the rotary union/tombstone while machining
For 1/2 Inch Bolt TYP
4.10
7.50 CLEARANCE 7.50 CLEARANCE
3.86
4.88 4.00 CLEARANCE 4.88 4.00 CLEARANCE
2.63
7.50 CLEARANCE
3.86
3.86 and during pallet change. Additional configurations are possible see IS3206.
2.63
4.88 4.00 CLEARANCE
2.63
Hose Management
Hose Management
Hose Management Additional Rail for Hose Clamp Hose Management
Model No. ID Hose OD W 35-2003-01 .39 .36 - .43 .42 35-2004-01 .50 .47 - .54 2.09
ID
Model No. Includes 93-2000-03 Rail and Mounting Hardware Industry standard T-Slot rail nut mounting.
ID
ID
W
7.00
W
35-2005-01 .55 .52 - .59 35-2006-02 .68 .65 - .72 35-2003-03 .39 .36 - .43 .46 35-2004-03 .50 .47 - .54 1.65 35-2005-03 .55 .52 - .59 35-2006-05 .68 .65 - .72 W
W
7.00
7.00
ID
Hose Clamps not included with Rail (order at left)
ID
ID
W
W
Made with FlippingBook - Online Brochure Maker