Tapes
Tapes
RAP HOLD 10
FT1
Rap Hold 10 is a double-sided adhesive tape which is ideally suited to applications where a temporary mounting is required. The natural rubber based adhesive is supported on a woven cotton carrier. It has good adhesion to a wide range of substrates and removes without any residue. Application: Infusion, oven and autoclave cure cycles Resin: Polyester, Vinyl Ester, Epoxy, Phenolic, BMI and Polyimide
Flashtape 1 is a polyester-backed pressure-sensitive silicone adhesive tape utilized for temporarily securing vacuum infusion materials such as peel ply, breather, or release film in place during the manufacturing process. It cleanly strips off after use, leaving no residue behind. Application: Infusion, oven and autoclave cure cycles Resin: Polyester, Vinyl Ester, Epoxy, Phenolic, BMI and Polyimide
COLOR WHITE
ADHESIVE TYPE NATURAL RUBBER TEMP. RANGE
WIDTH (INCHES)
LENGTH (FEET)
COLOR
ADHESIVE TYPE
WIDTH (INCHES)
LENGTH (FEET)
PRODUCT CODE
DESCRIPTION
UOM
PRODUCT CODE
DESCRIPTION
UOM
BLUE SILICONE ELONGATION MAX USE TEMP. 100% 400 F / 204 C
676218 830206
AT-RH10-TAN-330-25.4-23-RB AT-RH10-TAN-330-50.8-23-RB
Roll Roll
1 2
75 75
676184 676182 676183
AT-FT1-BLU-64-12.7-66-SL AT-FT1-BLU-64-25.4-66-SL AT-FT1-BLU-64-50.8-66-SL
Roll Roll Roll
0.5
216 216 216
1 2
5°F to 160°F / -15°C to 70°C
Available in standard widths of 1 and 2”. A polyester based version is also available.
Available in standard widths of .5, 1 and 2”. Also available with rubber based adhesives as FT1R.
TOOLCOAT ST
FT2
Toolcoat ST is a PTFE-sensitive tape with a fully cured silicone adhesive, providing multiple releases on various tooling surfaces. Its high conformability makes it ideal for use on contoured bond jigs and lay-up molds. Inert to most chemicals and environmental factors, it eliminates the need for liquid or paste release coatings. The tape offers excellent release, low friction, electrical insulation, and temperature resistance. It is also suitable for applications like flash control, heat-
Flashtape 2 is a more robust version than FT1, containing double the amount of polyester carrier Its application is the same as the FT1 version, however, it is a stronger version and it should be used where extra strength is needed. It cleanly strips off after use, leaving no residue behind. Application: Infusion, oven and autoclave cure cycles Resin: Polyester, Vinyl Ester, Epoxy, Phenolic, BMI and Polyimide
sealing machines, and non-stick, low friction surfaces. Application: Infusion, oven and autoclave cure cycles Resin: Polyester, Vinyl Ester, Epoxy, Phenolic, BMI and Polyimide
COLOR
ADHESIVE TYPE
WIDTH (INCHES)
LENGTH (FEET)
PRODUCT CODE
DESCRIPTION
UOM
BLUE / GREEN
SILICONE
676178 676186
AT-FT2-BLU-88.9-25.4-66-SL AT-FT2-BLU-88.9-50.8-66-SL
Roll Roll
1 2
216 216
WIDTH (INCHES)
LENGTH (FEET)
COLOR BEIGE
ADHESIVE TYPE
PRODUCT CODE
DESCRIPTION
UOM
ELONGATION
MAX USE TEMP.
SILICONE
100%
400 F / 204 C
676181 232934
AT-TCST02S-GRY-89-25.4-33 SL AT-TCST02S-GRY-89-50.8-33 SL
Roll Roll
1 2
108 108
Available in standard widths of 1 and 2”. Also available with rubber based adhesives as FT2R.
MAX USE TEMP. 500 F / 260 C
RAP HOLD 1
Available in standard widths of 1, 2 and 4”. An acrylic-based adhesive version is also available.
Rap Hold 1 is a higher temperature double-sided adhesive tape which is ideally suited to applications where a temporary mounting is required. It features a polyester backing film with acrylic adhesive. Application: Infusion, oven and autoclave cure cycles Resin: Polyester, Vinyl Ester, Epoxy, Phenolic,BMI and Polyimide
VAC-SHRINK ST2
Shrink Tape ST2 is a tough, flexible, heat-shrinkable polyester film. When wrapped around an object and heated, ST2 has the unique ability to shrink and apply pressure over the surface of composites. This simple method of pressure application is advantageous in many industries, including Advanced Composites, Aerospace, and Defense.
WIDTH (INCHES)
LENGTH (FEET)
COLOR CLEAR
ADHESIVE TYPE
PRODUCT CODE
DESCRIPTION
UOM
ACRYLIC
232953
AT-RH1-CLR-102-25.4-33-AC
Roll
1
108
COLOR CLEAR SHRINK % 20% UPPER USE TEMPERATURE °C/°F 165/ 330
WIDTH (INCHES)
ELONGATION
MAX USE TEMP.
PRODUCT CODE
DESCRIPTION
UOM
Available in standard widths of 1 and 2”. A rubber based adhesive version is also available.
100%
400 F / 204 C
683725
RF-ST2-CLR-51-51-91-NP-NP
Roll
2
ST2 is available uncoated (Type S) and release coated with a PTFE release coat (Type R).
21
20
AEROVAC PRODUCT CATALOG
Made with FlippingBook - PDF hosting