Adhesive Tape
RAP HOLD 1 Rap Hold 1 is a higher temperature double-sided adhesive tape which is ideally suited to applications where a temporary mounting is required. It features a polyester backing film with acrylic adhesive. Application: Infusion, oven and autoclave cure cycles Resin: Polyester, Vinyl Ester, Epoxy, Phenolic, BMI and Polyimide COLOR ADHESIVE TYPE CLEAR ACRYLIC ELONGATION MAX USE TEMP. 100% 400 F / 204 C DESCRIPTION WIDTH LENGTH 1 in (25.4 mm) 36 yd (33 m)
PRODUCT CODE
232953
AUS AT-RH1-CLR-102-25.4-33-AC
Available in standard widths of 1 and 2”. Also available with rubber based adhesives as FT2R.
RAP HOLD 10
Rap Hold 10 is a double-sided adhesive tape which is ideally suited to applications where a temporary mounting is required. The natural rubber based adhesive is supported on a woven cotton carrier. It has good adhesion to a wide range of substrates and removes without any residue. Application: Infusion, oven and autoclave cure cycles Resin: Polyester, Vinyl Ester, Epoxy, Phenolic, BMI and Polyimide
COLOR WHITE
ADHESIVE TYPE NATURAL RUBBER
PRODUCT CODE
DESCRIPTION
UOM
WIDTH
LENGTH
676218 830206
AT-RH10-TAN-330-25.4-23-RB AT-RH10-TAN-330-50.8-23-RB
Roll Roll
1 2
75 75
CARRIER WOVEN COTTON
TEMP. RANGE 5 F to 160 F / -15 C to 70 C
Available in standard widths of 1 and 2”. A polyester based version is also available.
TOOLCOAT ST
Toolcoat ST is a PTFE tape with a fully cured silicone adhesive, providing multiple releases on various tooling surfaces. Its high conformability makes it ideal for use on contoured bond jigs and lay-up molds. Inert to most chemicals and environmental factors, it eliminates the need for liquid or paste release coatings. The tape offers excellent release, low friction, electrical insulation, and temperature resistance. It is also suitable for applications like flash control, heat-sealing machines, and non-stick, low friction surfaces. Application: Infusion, oven and autoclave cure cycles Resin: Polyester, Vinyl Ester, Epoxy, Phenolic, BMI and Polyimide
COLOR BEIGE
ADHESIVE TYPE
PRODUCT CODE
DESCRIPTION
WIDTH
LENGTH
SILICONE
676181 232934
AT-TCST02S-GRY-89-25.4-33-SL AT-TCST02S-GRY-89-50.8-33-SL
1 in (25.4 mm) 2 in (50.8 mm)
36 yd (33 m) 36 yd (33 m)
CARRIER
MAX USE TEMP.
PTFE
500 F / 260 C
Available in standard widths of 1, 2 and 4”. An acrylic-based adhesive version is also available.
24
Made with FlippingBook - PDF hosting