Peel Ply & Release Fabrics
200TFP and 200TFNP
200TFP or 200TFNP is a woven glass fiber fabric coated with PTFE (Polytetrafluoroethylene), distinguished by one being porous (200TFP) and the other non-porous (200TFNP). These fabrics are designed for applications up to 550°F and ensure effortless release of cured laminates. By preventing adhesion between the composite material and the mold surface, they enable clean removal without damage. Additionally, they contribute to achieving desired surface textures or finishes in the final product. The porosity of 200TFP facilitates the evacuation of excess resin and volatiles during the manufacturing process.
Release Film 2
Narrow width hot knife slitting is available.
Application: Infusion, oven and autoclave cure cycles Resin: Polyester, Vinyl Ester, Epoxy, Phenolic and BMI
RELEASE FILM APPLICATION SUMMARY
PRODUCT CODE
DESCRIPTION
CONSTRUCTION
TEMP.
WEIGHT
UPPER USE TEMPERATURE °C/°F
TENSILE STRENGTH MPA TD:5801 / MD:9427 PSI
RELEASE PERFOR- MANCE
APPROX. COST/ M2
ELONGATION %
CONFORM- ABILITY
PRODUCT MATERIAL
APPLICATION
MARKET
RESIN
PR-200TFNP-TAN-76-965-91 TFE-N-NA 2.25 OZ 38’’ X 100 YD PR-200TFP-BRN-76-1270-91 TFE-P-NA 2.25 OZ 50 X 300’
PTFE COATED PLAIN WEAVE FIBERGLASS PTFE COATED PLAIN WEAVE FIBERGLASS
678144
550 F / 290 C 1.8 - 2.1 OZ / SY
Infusion, oven and autoclave cure cycles
Polyester, Vinyl Ester, Epoxy, Phenolic and BMI Polyester, Vinyl Ester and Epoxy Polyester, Vinyl Ester, Epoxy, Phenolic and BMI Polyester, Vinyl Ester, Epoxy, Phenolic and BMI Polyester, Vinyl Ester, Epoxy, Phenolic and BMI Polyester, Vinyl Ester, Epoxy, Phenolic and BMI
TD:800 / MD:500 %
A2300 PP 150°C/302°F
++++
+
$$
All
676145
550 F / 290 C 1.8 - 2.1 OZ / SY
Marine and Wind Aerospace, Defense
A2400 PE 120°C/248°F 6526 PSI
560%
++++
++
$
Infusion
Autoclave cure cycles
TOOLCOAT (TC805 / TC807)
A2500 PMP 204/ 400 4351 PSI
285%
+
+++
$$
Toolcoat is a self-adhesive tool release film made of fiberglass coated with non-porous PTFE, designed to facilitate the separation of composite parts from molds or tools. It enables easy removal of cured parts without surface damage, simplifies application, and reduces labor. Inert to most chemicals and environmental factors, it comes in thicknesses of 805 S/A at 0.005 inches and 807 S/A at 0.007 inches. Both variants offer silicone and acrylic adhesives, supporting different maximum temperatures.
Autoclave cure cycles
Aerospace, Defense
A5000 FEP 260 / 500 3500 PSI
300%
++++
++++ $$$$
TD:6000 / MD:10000 PSI
Autoclave cure cycles
Aerospace, Defense Auto, Aerospace, Defense
A6200
ETFE
232 / 450
350%
+++
+++
$$$
Narrow width hot knife slitting is available.
+++++ +++++ $$$$$ Autoclave cure cycles
MR1 PTFE 316 / 600 4300 PSI
400%
Application: Infusion, oven and autoclave cure cycles Resin: Polyester, Vinyl Ester, Epoxy, Phenolic and BMI
PRODUCT CODE
DESCRIPTION
ADHESIVE TYPE
TEMP.
TOTAL THICKNESS
COMMON PATTERNS
PR-TC805A-BRN-127-914-16 TFE-N-AC 3.75 OZ X 36’’ X 52’ PR-TC807A-BRN-178-914-16.5 TFE-N-AC 5.25 OZ X 36’’ X 54’ PR-TC805S-BRN-127-914-33 TFE-N-SL 3.75 OZ 36’’ X 108’ PR-TC807S-BRN-178-914.16.5 TFE-N-SL 5.25 OZ 36’’ X 54’
Acrylic Adhesive on PTFE Coated Glass Acrylic Adhesive on PTFE Coated Glass Silicone Adhesive on PTFE Coated Glass Silicone Adhesive on PTFE Coated Glass
232933
400 F / 204 C
.005”
1" (25.4mm)
P
P3
P31
0.25" (6.3mm)
0.25" (6.3mm)
1" (25.4mm)
232930
400 F / 204 C
.007”
0.25" (6.3mm)
0.25" (6.3mm)
698255
550 F / 290 C
.005”
0.045" (1.143 mm)
0.015" (0.38 mm)
0.015" (0.38 mm)
232933
550 F / 290 C
.007”
P1
P16 Hot
MP25
0.24" (6mm)
0.5" (12.7mm)
0.078" (2mm)
0.078" (2mm)
0.24" (6mm)
0.5" (12.7mm)
0.016" (0.40 mm)
0.045" (1.143 mm)
0.005" (0.127 mm)
Other perforations are also available. Please contact the technical team for further support.
7
6
AEROVAC PRODUCT CATALOG
Made with FlippingBook - PDF hosting