Release Film
A2300
A2300 is a cast co-extruded polypropylene-based film developed for release applications in composite infusion processes and is available in both perforated and non-perforated configurations. In the wind blade repair market, the non-perforated version can also be used as a bagging and consolidation film for small repairs using dry lay-up processes, supporting laminate consolidation and resin control during cure.
Application: Infusion, oven and autoclave cure cycles Resin: Polyester, Vinyl Ester, Epoxy and Phenolic
COLOR
TENSILE
TOTAL THICKNESS
PERFORATION TYPE Perforated (P3) Non- perforated
PRODUCT CODE
DESCRIPTION
WIDTH
LENGTH
ORANGE TD: 5801 / MD: 9427 PSI ELONGATION MAX USE TEMP. 300% 302 F / 150 C
60 in (1524 mm) 60 in (1524 mm)
333 yd (305 m) 333 yd (305 m)
1 mil (30 µm) 1 mil (30 µm)
676355 RF-A2300-ORG-30-1524-305-P3-SHT
AUS RF-A2300-ORG-30-1524-305- NP-NP-FNS
841523
Available in 1 and 2 mil thicknesses up to 78 in. wide. Custom narrow width slitting is available to 2 in. minimum. Available with a range of perforation patterns.
A2400
A2400 is a blown co-extruded polyethylene-based film specifically developed for release applications in composite infusions. Application: Infusion Resin: Polyester, Vinyl Ester and Epoxy
TOTAL THICKNESS
PERFORATION TYPE Perforated (P16)
COLOR TENSILE TD: 6528 / MD: 6528 PSI ELONGATION MAX USE TEMP. 560% 248 F / 120 C ORANGE & RED
PRODUCT CODE
DESCRIPTION
WIDTH
LENGTH
RF-A2400-ORG-25-1550-500-HOT- P16-FNS-SHT
61 in (1550 mm)
547 yd (500 m)
1 mil (25 µm)
685028
Available in 1 and 2 mil thicknesses up to 78” wide. Custom narrow width slitting is available to 2” minimum. Available with a range of perforation patterns.
A2500
A2500 is a Polymethylpentene (PMP) release film used in the processing of flat or simple curvature components. It offers a low-cost alternative to other high-temperature Aerospace-qualified films and is PFAS free, ensuring excellent release from all common resin systems. Application: Autoclave cure cycles Resin: Polyester, Vinyl Ester, Epoxy, Phenolic and BMI
TOTAL THICKNESS
PERFORATION TYPE Non- perforated Perforated (P3)
COLOR TENSILE MPA: 4351 ELONGATION MAX USE TEMP. 285% 400 F / 204 C PINK & RED
PRODUCT CODE
DESCRIPTION
WIDTH
LENGTH
RF-A2500-RED-30-1350-400-NP- FNS-SHT AUS RF-A2500-RED-30-1350-400- PIN-P3-FNS
53 in (1350 mm) 53 in (1350 mm)
437 yd (400 m) 437 yd (400 m)
2 mil (30 µm) 2 mil (30 µm)
843148
849637
Available in 1.5 and 2 mil thicknesses up to 80” wide. Custom narrow width slitting is available to 2” minimum. Available with a range of perforation patterns.
TD: Transverse Direction MD: Machine Direction MPa: Megapascal
9
AEROVAC PRODUCT CATALOG
Made with FlippingBook - PDF hosting