Pest Armor® | Universal Installation Instructions

Applicable to all Pest Armor Architectural Mesh Profiles

INSTALLATION INSTRUCTIONS

INSTALLING PEST ARMOR ON OFFSET SURFACES

› Lay out sections of Pest Armor along the offset surface. › Install each section of Pest Armor by applying downward pressure to the bottom tab, while pushing up towards the second surface. Secure the bottom tab every 12”, using neoprene-washered screws (included), keeping the Pest Armor tight to both surfaces. › Overlap all seams 1”.

TURNING PEST ARMOR 90° ON OFFSET SURFACES

› At the point of your desired 90° turn, make 1 relief cut on the top tab of your Pest Armor. Bend the Pest Armor 90° to meet the offset surface. › Flatten and secure the top tab as needed. Secure the bottom tab every 12” using neoprene-washered screws (included). › If necessary, add relief cuts to the bottom and middle tab to allow Pest Armor to flex for compounding angles (such as a roof ridge vent end cap). Start in the middle of the end cap for the first relief cut and then add one relief cut on each side, approximately 1” from the center cut. Add more cuts as necessary.

PAINT ALL EDGES THAT HAVE BEEN CUT DURING INSTALLATION TO SEAL AND PROTECT PEST ARMOR FROM RUST OR CORROSION

1/4”

3/8”

WOVEN MESH

EXPANDED MESH

ARCHITECTURAL MESH EXCLUSION PROFILES

L-MESH

LOW PROFILE Z-MESH

HI PROFILE Z-MESH

PEST ARMOR ™ MESH

PROFILE

LENGTH CASE PACK

RAML350

1/4” Woven Mesh L-Mesh

48”

20 PCS / 80 LF

RALP1448B

1/4” Woven Mesh Low Profile Z-Mesh 48”

40 PCS / 160 LF

RALP1491B

1/4” Woven Mesh Low Profile Z-Mesh 91-1/2”

21 PCS / 160 LF

RA1448B

1/4” Woven Mesh Hi Profile Z-Mesh 48”

40 PCS / 160 LF

RA1491B

1/4” Woven Mesh Hi Profile Z-Mesh 91-1/2”

21 PCS / 160 LF

RA3848B

3/8” Expanded Mesh Hi Profile Z-Mesh 48”

40 PCS / 160 LF

PEST ARMOR EXCLUSION APPLICATIONS

SOLAR PANEL

RIDGE VENT

FOUNDATION SILL PLATE

DON’T JUST REMOVE. EXCLUDE. INDUSTRY PROVEN WILDLIFE EXCLUSION PRODUCTS. MADE IN THE USA SINCE 1947.

PAUIS_REV1

10950 Linpage Place St. Louis, MO 63132 | 800-325-7076 | www.hy-c.com | sales@hy-c.com

Page 1 Page 2

www.hy-c.com

Made with FlippingBook - professional solution for displaying marketing and sales documents online