8431 Murphy Drive Middleton, WI 53562
Telephone: 608-836-4400 Facsimile: 608-831-9279 www.intertek.com/building
TEST REPORT FOR HY-C COMPANY, LLC Report No.: 104415176MID-002AR2 Date: 11/09/21
m r = mass of particulate from the filter, filter gasket, and probe assembly from the room air blank filter holder assembly, mg. m n = Total amount of particulate matter collected, mg. M s = the dilution tunnel dry gas molecular weight (may be assumed to be 29 g/g mole (lb/lb mole). P bar = Barometric pressure at the sampling site, mm Hg (in. Hg). P g = Static Pressure in the tunnel (in. water). P R = Percent of proportional sampling rate. P s = Absolute average gas static pressure in dilution tunnel, mm Hg (in. Hg). P std = Standard absolute pressure, 760 mm Hg (29.92 in. Hg). Q std = Average gas flow rate in dilution tunnel. Q std = 60 (1 - B ws ) V s A [T std P s /T s P std ] dscm/min (dscf/min). T m = Absolute average dry gas meter temperature, K (R). T mi = Absolute average dry gas meter temperature during each 10-min interval, i , of the test run. T mi = (T mi(b) + T mi(e) )/2 where: T mi(b) = Absolute dry gas meter temperature at the beginning of each 10-min test interval, i, of the test run, K (R), and T mi(e) = Absolute dry gas meter temperature at the end of each 10-min test interval, i, of the test run, K (R). Ts = Absolute average gas temperature in the dilution tunnel, K (R). Tsi = Absolute average gas temperature in the dilution tunnel during each 10-min interval, i, of the test run, K (R). T si = (T si(b) + T m=si(e) )/2 where: T si(b) = Absolute gas temperature in the dilution tunnel at the beginning of each 10-min test interval, i, of the test run, K (R), and T si(e) = Absolute gas temperature in the dilution tunnel at the end of each 10-min test interval, i, of the test run, K (R). V m = Volume of gas sample as measured by dry gas meter, dcm (dcf). V mc = Volume of gas sampled corrected for the post test leak rate, dcm (dcf). V mi = Volume of gas sample as measured by dry gas meter during each 10-min interval, i, of the test run, dcm. V m(std) = Volume of gas sample measured by the dry gas meter, corrected to standard conditions. V m(std) = K 1 V m Y [(P bar + (ΔH/13.6))/T m ] where: K 1 = 0.3855 K/mm Hg for SI units and = 17.64 R/in. Hg for inch-pound units. V m(std) = K 1 V mc Y [(P bar + (ΔH/13.6))/T m ] where:
Version: 03/13/18
Page 10 of 25
RT-L-AMER-Test-3778
Made with FlippingBook - professional solution for displaying marketing and sales documents online