PROPER BURN PRACTICES FOR MAXIMUM EFFICIENCY AND SAFETY!
• The chimney is one of the most important elements of the furnace. If the chimney is not connected properly and installed according to manufacturer’s specification and national and local codes, the unit is not safe and will not burn efficientl . Lack of proper chimney installation will cause unit to produce more smoke and less heat output. See Pages 5-10 of this manual to ensure proper installation. • Proper use of all electrical components is essential. The wall thermostat must be hooked up to the furnace and located within the heated area of the home. • To maximize the performance of the furnace, the draft blower may not be adjusted or altered in any manner. • Wood that is properly cut and stored to dry will produce more BTUs and higher heat output than wood that has a higher moisture content. Wood with higher moisture content will create creosote in the chimney and cause flue fires • There should be no alteration of the X1020 furnace in any way, as this will void the UL391 safety listing and affect the operation of the furnace. This will also void the warranty of the unit. • HY-C Company makes two types of units, indoor as well as outdoor furnaces. The indoor units are manufactured and tested for indoor applications only. They are not meant to go outside the house but must be placed indoors in a basement or utility room. Any indoor unit placed outside the home in a shed or building will void the warranty, violate the safety listing, and will not produce the maximum efficiency possible with this unit. For outdoor applications please use model X1920.
• Indoor units many not be installed in mobile homes.
Made with FlippingBook - professional solution for displaying marketing and sales documents online