FC1000E/SF1000E/X1020/L1020: EPA 2020 Certification Report

CERTIFICATE OF NIST TRACEABLE CALIBRATION

Calibration Certificate No: 84107

Customer Information Customer: Address : 8431 Murphy Drive Middleton WI 53562 Intertek

Customer PO #: Verbal - Christine Schultze

Calibration Procedure Information

Procedure ID:

Revision #: 11

Revision Date:

GTP TMASS-LAM

6/18/2019

Calibration Standards Information

Graftel ID

Manufacturer

Model #

Description

CAL Due

10062

Graftel

9202

5-Channel Temperature Sensor

8/17/2021

10074

Meriam

50MJ10-14

Laminar Flowmeter

5/21/2021

10075

Meriam

50MJ10-9

Laminar Flowmeter

5/26/2021

10128

Furness

FCO352

Diff Pressure

5/7/2021

60030

Paroscientific

760-100A

Pressure, 100 psia

5/21/2021

51202

Paroscientific

760-100A

Pressure, 100 Psia

7/14/2021

10201

Hobo

UX100-011

Environment Monitor

10/15/2020

Sensor Information

Manufacturer:

Description:

Method Used: Laminar

Sierra

Mass Flow Meter

Model #: Instrument ID#:

Rated Accuracy: ±

Accuracy Specified By: Sierra

1414 M50L-AL-DD-2-PV2-V1-5PC

slpm 1 % of Full Scale

Range:

0 10 to

Condition: Functional

Serial #:

189157

Comments: Calibration Date: 07/24/2020

Calibration Due: 01/24/2021 Rev.1,7-29-20: Due date corrected.

The calibrations within the certificate/report are traceable through NIST or another National Metrology Institute to the International System of Units (SI). The reported calibration uncertainty has a confidence level of 95% (k=2). A calibration uncertainty ratio of 4:1 was maintained unless required uncertainty is supported by analysis. Graftel Quality Assurance System complies with applicable requirements of ISO/IEC- 17025-2017, ANSI/NCSL Z540-l-1994 and ISO 9001: 2008. All results contained within this certificate relate only to item(s) calibrated. This certificate shall not be reproduced except in full and with the written consent of Graftel. Acceptance Criteria per Simple Acceptance Rule: Measurement Uncertainty is not applied to the measured value when in/out of tolerance statement is made.

Performed By:

Date:_____________ 7/29/2020

Calibration Technician Lap Chan

Approved By:

Date:_____________ 7/29/2020

Scott Pickett Vice President, Lab Services

Page 1 of 2 GRAFTEL 95 Chancellor Dr., Roselle, IL 60172 847.364.2600

www.graftel.com

Made with FlippingBook - professional solution for displaying marketing and sales documents online