Fox Valley Metrology 3114 Medalist Drive Oshkosh, WI 54902 (920) 426-5894 ● Fax (920) 426-8120 http://www.FoxValleyMetrology.com
CERTIFICATE OF CALIBRATION
Certificate No. ACT-1272
This certificate shall not be altered in any form or reproduced, except in full, without prior written approval from originating lab. These results relate only to the item(s) calibrated. Form Revision 6: 02/04/2012
Certification Number CK098-39579-481
Procedures Followed
FVE-033 rev. 1
Intertek 8431 Murphy Drive Middleton, WI 53562
For
Purchase Order #
Timer
Test Instrument
Standards Used
Instrument FVS-648
Serial Number
Trace Number
Next Cal
N/A N/A
CK034-42744-397 CJ340-36290-481
02/28/2021 12/31/2020
94440-10 101587800 Cole-Parmer
Model Make
FVS-678
Identification Serial Number
█ ▀ █ ▀ █▄█▄█▄ █▀▀ ▄▄ █ ▀█ ▄ █▄█▄▀▄▀██▀▀▀▄▄ █ ▀ ▄██▀██▄▄█▄ █ ██▀▄▄ █▄ █▄▄ █▀▀███▄▄█▀▀▄▀▄ █▄▄██▄▄██▄█▄▄▄
1212
Hearth
Customer Location
Total expanded measurement uncertainties expressed are based on a confidence level of 95%; coverage factor of (k=2). The statement of compliance in this certificate was issued without taking the uncertainty of measurement into consideration. The customer shall assess the results and uncertainty when determining if the results meet their needs. (This is considered “shared responsibility.”) Uncertainties expressed in nominal units. All instruments have been calibrated against standards traceable to NIST. Calibration was completed in accordance with ISO/IEC 17025:2017, ANSI/NCSL Z540-1-1994 and ANSI/NCSL Z540.3-2006. Other standards listed upon request.
In Tolerance In Tolerance
Calibration Date Calibration Conditions Calibration Location Form Reviewed By Calibrated By Condition Returned Condition Received
Benjamin Kees M.T.
69.0°F, 20.6°C, 22.0%RH On Site
04/07/2020 04/07/2021
Recalibration Due
* denotes "Out of Tolerance"
Calibration Results
Feature
Nominal
Lower Limit
Upper Limit
As Found
As Left
Uncertainty
Timer
(sec)
(sec) 59.5 59.5 (sec) 299.5 299.5 (sec)
(sec) 60.5 60.5 (sec) 300.5 300.5 (sec)
(sec)
(sec)
(sec)
60 60
60 60
60 60
0.7 0.6
(sec)
(sec)
(sec)
(sec)
300 300
300 300
300 300
0.7 0.6
(sec) 1800 1800
(sec) 1800 1800
(sec) 1800 1800
(sec)
1799.5 1799.5
1800.5 1800.5
0.6 0.6
Certification Number CK098-39579-481
Job Number JK070-36547-497
Page 1 of 1
Made with FlippingBook - professional solution for displaying marketing and sales documents online