Installation
A
B
To connect the water hoses to the taps: 1. Connect one end of each water hose to the Hot or Cold tap. 2. Turn the fittings by hand until they are tight, and then tighten them an additional two-thirds of a turn with a pliers. To prevent damage, do not overtighten the fittings. 3. When done, pull the water hoses up and down to check if they are properly connected.
4. Put the other ends of the hoses into a bucket and open the taps for 10-15 seconds to remove impurities. When done, close the taps.
English 28
FlexWash_WV9900M_DC68-03768A-07_EN.indd 28
2019-05-23 PM 2:55:19
Made with FlippingBook - Online magazine maker