5. Connect the other ends of the water hoses to the corresponding inlets on the rear of the machine as specified. Make sure the hot water hose is connected to the hot inlet, and the cold water hose to the cold inlet. 6. Repeat step 2 above on the other fittings. Make sure both water hoses are connected properly. See the ‘4C’ information code for troubleshooting. 7. Open both taps, and then check if there is a leak. CAUTION To prevent water hoses from being bent or kinked, make sure there is at least a 6-inch (150 mm) space between the washer and the rear wall. NOTE If you do not want to use hot water, insert the inlet cap into the hot water inlet. You must purchase the inlet cap. If the hot water inlet is closed with the inlet cap, you must select Cold for the water temperature. All other water indicators turn off.
English 29
FlexWash_WV9900M_DC68-03768A-07_EN.indd 29
2019-05-23 PM 2:55:19
Made with FlippingBook - Online magazine maker