The pipe connector can be positioned in the following ways:
Over the edge of a wash basin The pipe connector (B) must be placed at a height of between 24 in. (60 cm) and 35 in. (90 cm) from the floor. To keep the spout of the drain hose bent, use the supplied plastic hose guide (A) . Secure the guide to the wall using a hook to ensure stable drainage. NOTE B : Pipe Connector ln a standpipe or laundry tub The laundry tub (B) or standpipe (C) must be no shorter than 18 in. (46 cm) and no higher or longer than 96 inches (245 cm) . Make sure the pipe connector and the standpipe are not airtight. The height of the standpipe (E) must be 43 in. (1100 mm) or higher from the floor. NOTE A : Hose guide / D : Tie straps / F : Pipe Connector / G: 85 mm CAUTION • Do not extend the (Y-shaped) pipe connector using an extension hose. • Make sure you face the tip of the pipe connector downwards to the drain hole. Positioning the connector tip elsewhere can cause the drained water to flow backward.
B
A
A F
G
E
D
B
C
Dimensions of the pipe connector
D
172 mm
67 mm
A
D
A
112.5 mm
Ø 35
B
E
F
B
C
85 mm
60 mm
C
F
E
English 31
FlexWash_WV9900M_DC68-03768A-07_EN.indd 31
2019-05-23 PM 2:55:20
Made with FlippingBook - Online magazine maker