Installation
To position without the pipe connector If you do not use the pipe connector, each drain hose can be positioned in the following ways:
Over the edge of a wash basin The drain hose must be placed at a height of between 24 in. (60 cm) and 35 in. (90 cm) from the floor. To keep the spout of the drain hose bent, use the supplied plastic hose guide (A) . Secure the guide to the wall using a hook to ensure stable drainage. ln a standpipe or laundry tub The laundry tub (B) or standpipe (C) must be no shorter than 18 in. (46 cm) and no higher or longer than 96 inches (245 cm) . Make sure the drain hose and the standpipe are not airtight. The height of the standpipe (E) must be 43 in. (1100 mm) or higher from the floor. NOTE A : Hose guide / D : Tie straps
A
A
E
D
B
C
English 32
FlexWash_WV9900M_DC68-03768A-07_EN.indd 32
2019-05-23 PM 2:55:20
Made with FlippingBook - Online magazine maker