Maintenance
Keep the washer clean to prevent its performance from deteriorating and to preserve its life cycle. WARNING Certain internal parts are intentionally not grounded and may present a risk electric shock only during servicing. Service personnel – Do not contact the following parts while the appliance is energized: Control board, heat sink, motor, inlet valve and pump.
General considerations
Cleaning Surface of the washer Use a soft cloth with a nonabrasive household detergent. Do not spray water onto the
washer. Exterior 1. Turn off the water taps after finishing the day’s washing.
This will shut off the water supply to your washer and prevent the unlikely possibility of damage from escaping water. Leave the door open to allow the inside of your washer to dry out. 2. Use a soft cloth to wipe up all detergent, bleach, or other spills as they occur. Clean the following as recommended below: - Control panels – Clean with a soft, damp cloth. Do not use abrasive powders or cleaning pads. Do not spray cleaners directly on the panels. - Cabinet – Clean with soap and water. Interior Clean the interior of your washer periodically to remove any dirt, soil, odor, mold, mildew, or bacterial residue that may remain in your washer as a result of washing clothes. CAUTION Failure to follow these instructions may result in unpleasant conditions, including odors and/or permanent stains on your washer or laundry. NOTE Hard water deposits may be removed, if needed. Use a cleaner labeled “Washer safe”.
English 56
FlexWash_WV9900M_DC68-03768A-07_EN.indd 56
2019-05-23 PM 2:55:25
Made with FlippingBook - Online magazine maker