Mesh filter Clean the mesh filter of the water hose once or twice a year.
1. Turn off the washer, and then unplug the power cord. 2. Close the taps. 3. Loosen and disconnect the water hose from the back of the washer. Cover the hose with a cloth to prevent water from gushing out. 4. Use pliers to pull out the mesh filter from the inlet valve. 5. Submerge the mesh filter deeply in water so that the threaded connector is also submerged. 6. Dry the mesh filter completely in a shaded area. 7. Reinsert the mesh filter into the inlet valve, and reconnect the water hose to the inlet valve. 8. Open the tap.
NOTE If the mesh filter is clogged, the “4C” information code appears on the the washer’s display.
English 57
FlexWash_WV9900M_DC68-03768A-07_EN.indd 57
2019-05-23 PM 2:55:25
Made with FlippingBook - Online magazine maker