Troubleshooting
Checkpoints If you encounter an issue to check with the washer, first check the table below and try the suggestions.
Symptom
Action
• Make sure your home electrical system is providing electrical power that matches the requirements of the washer. See page 21 . • Make sure the power plug of the washer is completely plugged in. • Make sure the door is properly closed. • Make sure the taps are open. • Make sure to press and hold START/PAUSE to start the washer. • Make sure Child Lock is not activated. • Before the washer starts to fill, it will make a series of clicking noises to check the door lock and does a quick drain. • Check the fuse or reset the circuit breaker. • Check if the upper or lower washer displays an information code on the respective status bar. • Fully open the tap. • Make sure the door is properly closed. • Make sure the water supply hose is not frozen. • Make sure the water supply hose is not kinked or clogged. • Make sure there is sufficient water pressure. • Make sure the washer is running with sufficient water pressure. • If you are using powdered detergent, do not use more than recommended. • If you are using liquid detergent, do not over fill the liquid detergent compartment. • Remove the liquid detergent and softener containers, and then clean the detergent drawer.
Does not turn on.
Does not start.
Water supply is insufficient or no water is supplied.
After a cycle, detergent remains in the detergent drawer.
English 67
FlexWash_WV9900M_DC68-03768A-07_EN.indd 67
2019-05-23 PM 2:55:28
Made with FlippingBook - Online magazine maker